Small and cheap items - PRICES DROPPED

riddim-track

Senior Retro Guru
Feedback
View
Few small items for sale, excuse the junk but having a clear out
Make an offer if you want a few things
Located in London N10 for local meet/collection or can post at cost to buyer
Bank transfer preferred or PP if you must


GONE:
Hope Ti 24hole rear hub, 130mm OLD, took apart to use bearings however changed mind, can be reassembled easily, smooth bearings, good condition - £10
Tioga nylon toe clips - free with any other item
Brace thingy - £2 or free with any other item
13-32t Sunrace freewheel, really greasy but in very good condition - £5
28t Biopce inner ring not sure the bcd ?compact - £2 or free with something else
Shimano cranks 175mm, 110bcd, I started scrubbing off the anodizing then gave up, the bolts and inner ring are ok - £5
Sunrace friction 'thumbie', it might just come in useful - £2
Shimano chainrings - £2 for both or free with any purchase
Deore XT V brakes, with brand new pads - £20, Levers - £10, Both - £25
Modern Sram X4 8spd shifters and rear mech - £20
Shimano Deore DX package - I couldn't get the shifters working but it's all there -£7
Modern Avid V brake levers, hardly used - £5
Hope Ti Bottom Bracket, 108/68mm, good threads, smooth bearings -£40
Ritchey bar ends - £10
Tioga pedals, hardly used - £10
Shimano Deore pedals, in desperate need of servicing - £3
Onza bar ends - free with any other item
 
Re: Small and cheap items

Hope Campag freehub road hub

potentially interested in this, if you can confirm hole count and if the freewheel is in good condition? (it looks like it is)

thanks
 
Re: Small and cheap items

Can I take the 2 shimano rings, dx bits, Tioga pedals please.
 
Re: Small and cheap items

foz":7vnp19nb said:
Hope Campag freehub road hub

potentially interested in this, if you can confirm hole count and if the freewheel is in good condition? (it looks like it is)

thanks

Hi Foz, It's 32 hole, the freehub body is in good nick with a few slight marks from the cassete but nothing you wouldn't expect. The drive side bearing is lovely and smooth, the non drive side has a little resistance. It is for old 8spd campag pattern I hope you realise, I have quite a selection of cassette sprockets if you need any of them, I think it can be changed for shimano easily if you can source a freehub body.

please PM me if you are interested, regards, Adam
 

Latest posts

Back
Top