Scott Endorphin

[Southernred01]

Does anyone know what size seatpost a Endorphin takes? and what front :? mech fits it?

Also any ideas what forks would go best on it i am possibly thinking of rigid Pace rc31 style or old school sids not sure.

thanks for your time.

 

[Carlos the Slackal]

Old SIDs would be the best fit both in terms of travel and fork type for an Endorphin.

Not sure on mech size, but the folks at Scott are top people, give them a call, they'll know!

 

[Southernred01]

Scott

Thanks alot

 

[Carlos the Slackal]

De nada!

I'm a big Endorphin nut, so am always happy to help!

What do you have? One of the later ones with the vibration damping in the top tube, I hope!

 

[pieboy25]

Seatposts are 27.0mm, not sure on front mech size but can check mine out if you need?

I've got one of the later ones with vibration damping, have never tried one without but does it really make much difference?

 

[Tommi74]

In my frame 27,0 doesn´t fit. It´s a 26,8 , just like my Octane FX-3 an my 89 Boulder. Strange...

Anyhow, the "vibration-damper" is just a piece of carbon glued onto the sides of the top-tube, or am I wrong?

 

[scant]

I tested a scott endorphin for MBi BITD & that had judy forks made to look like SIDs, retail bikes were supposed to hav SID forks.

1 of my mechanic mates rowan (now in nirvana cycles) had 1 & it developed a mass of cracks despite fairly limited use.. so keep an eye on it!

 

[gibbleking]

i had spinergies fitted to mine.....that was a very light bike....got some attention though.

 

[Carlos the Slackal]

I
1 of my mechanic mates rowan (now in nirvana cycles) had 1 & it developed a mass of cracks despite fairly limited use.. so keep an eye on it!

From what I remember, for most, it was paint cracking as it wasn't able to flex with the frame

 

[scant]

I
1 of my mechanic mates rowan (now in nirvana cycles) had 1 & it developed a mass of cracks despite fairly limited use.. so keep an eye on it!

From what I remember, for most, it was paint cracking as it wasn't able to flex with the frame

while that does happen quite a lot on carbon frames in rowans case it was deffo the frame