First up we have a Raleigh Special Products RSP 250 frame from 2000, it has some lovely CNC work and is V or Disc compatible. I bought this on the understanding that it was 17.5" c-c but its not :evil: so is too small :cry:
Measurements are -
Seat tube c-c 15", c -t 17.5". Top tube c-c 22"
Its in good nick with no dents, dings or cracks. There are a few small scratches but no chain suck. I'll include an FSA Orbit headset, BB, seat Collar and no name seat post for £70 posted. Now £65 posted
Next are some Judy xc's from 2000 that are V or disc compatible, there are one or two small scratches but they are in VGC (9/10 i would say). They haven't been used for a long time so could do with a service, steerer is 195mm unthreaded. I'd like £55 posted for them. £50 posted
Hope rear disc brake in VGC(9/10), recently bled and pads are good. Comes with a 160mm rotor and the all important hose guides that bolt into the stops on your frame so you don't need to drill them. All mounting screws included and its a number 3 caliper and Mini lever (i think but correct me if im wrong)
£42.50 posted £37.50 posted -sold
Juicy 3 in white, VGC and recently bled with good pads, 160mm avid clean sweep 2 rotor and all mounting kit included £35 posted £30 posted - sold
Mavic 221 UB rims on Novatec disc hubs, 9spd HG70 cassette and skewers included. Rims have a few marks from tire fitting but have no brake wear, both wheels are pretty true and bearings are smooth - £85 posted - £75 posted - sold
XT M750 rear mech in good nick, some scratches as pictured but no play etc and in full working order £17 posted - £15 posted
M510 front/M590 rear shifter set with the original M510 rear included as spares or repairs. Good working order and cosmetically pretty spot on. £20 posted - £15 posted
Pics here: http://www.flickr.com/photos/29924174@N ... 372544357/
Measurements are -
Seat tube c-c 15", c -t 17.5". Top tube c-c 22"
Its in good nick with no dents, dings or cracks. There are a few small scratches but no chain suck. I'll include an FSA Orbit headset, BB, seat Collar and no name seat post for £70 posted. Now £65 posted
Next are some Judy xc's from 2000 that are V or disc compatible, there are one or two small scratches but they are in VGC (9/10 i would say). They haven't been used for a long time so could do with a service, steerer is 195mm unthreaded. I'd like £55 posted for them. £50 posted
Hope rear disc brake in VGC(9/10), recently bled and pads are good. Comes with a 160mm rotor and the all important hose guides that bolt into the stops on your frame so you don't need to drill them. All mounting screws included and its a number 3 caliper and Mini lever (i think but correct me if im wrong)
£42.50 posted £37.50 posted -soldJuicy 3 in white, VGC and recently bled with good pads, 160mm avid clean sweep 2 rotor and all mounting kit included £35 posted £30 posted - sold
Mavic 221 UB rims on Novatec disc hubs, 9spd HG70 cassette and skewers included. Rims have a few marks from tire fitting but have no brake wear, both wheels are pretty true and bearings are smooth - £85 posted - £75 posted - sold
XT M750 rear mech in good nick, some scratches as pictured but no play etc and in full working order £17 posted - £15 posted
M510 front/M590 rear shifter set with the original M510 rear included as spares or repairs. Good working order and cosmetically pretty spot on. £20 posted - £15 posted
Pics here: http://www.flickr.com/photos/29924174@N ... 372544357/
