Wanted Rigid Disc Forks with clearance for a 26 x 3” tyre

[Bullpup]

Good afternoon

I am looking for a Rigid Disc Fork for a standard 100mm Hub and with the clearance for a 26 x 3” tyre.

Does anyone have anything suitable please?

 

[wynne]

Afternoon. What a-c length, steerer length/diameter and axle type are you after? Got a couple of possibilities possibly.
Rich

 

[Bullpup]

Hi Rich

The axle is a standard 9mm quick release.
The steerer ideally needs to be at least 220 mm might be able to work with a little shorter. Diameter 1 1/8th
A-C is not critical except the radius of the combined rim and tyre is 360mm so needs to have adequate clearance above that and be taper free at that point.

 

[wynne]

Hi Rich

The axle is a standard 9mm quick release.
The steerer ideally needs to be at least 220 mm might be able to work with a little shorter. Diameter 1 1/8th
A-C is not critical except the radius of the combined rim and tyre is 360mm so needs to have adequate clearance above that and be taper free at that point.

I've sent you a message.