Regina 2 prong removal tool
- Thread starter Quizzer
- Start date
If you can't find the one above then I purchased this type and it works great on my regina oro, just had to file the 'shoulders' a bit for it to fit snug in the freewheel locators.
http://www.ebay.co.uk/itm/TWO-PRONG-SUN ... 4166cc54c7
http://www.ebay.co.uk/itm/TWO-PRONG-SUN ... 4166cc54c7
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Quizzer
Dirt Disciple
Filing suntourremoval tool prongs for regina freewheel.
Hi, Thanks for the info, i used a grinder on my suntour 2 prong tool and it done the job perfectly for me. I was careful to grind both sides of the prongs equally and got a very nice fit on the regina freewheel.
I put the spindle back in to hold the tool nice and snug but only just touching to allow for movement to free the freewheel.
The tool was held in a vice and i turned the wheel anti clockwise to free the freewheel.
Prior to doing this i had the wheel freewheel side down and applied a fair amount of my homemade penetrating oil to the back of the freewheel.
The freewheel came off without a problem.
I had done this before i put my wanted add for the regina freewheel removal tool, as i would still like to get one if one is available.
Regards..Quizzer
Hi, Thanks for the info, i used a grinder on my suntour 2 prong tool and it done the job perfectly for me. I was careful to grind both sides of the prongs equally and got a very nice fit on the regina freewheel.
I put the spindle back in to hold the tool nice and snug but only just touching to allow for movement to free the freewheel.
The tool was held in a vice and i turned the wheel anti clockwise to free the freewheel.
Prior to doing this i had the wheel freewheel side down and applied a fair amount of my homemade penetrating oil to the back of the freewheel.
The freewheel came off without a problem.
I had done this before i put my wanted add for the regina freewheel removal tool, as i would still like to get one if one is available.
Regards..Quizzer
- Feedback
- View
Midlife
Retro Wizard
http://i.ebayimg.com/00/s/NDAwWDM4NA==/ ... ~60_35.JPG
just out of curiosity will that remove the Regina ORO BX series of freewheels as above?
Shaun
just out of curiosity will that remove the Regina ORO BX series of freewheels as above?
Shaun
Quizzer
Dirt Disciple
Regina oro removal tool
"just out of curiosity will that remove the Regina ORO BX series of freewheels as above? "
Hi..Yes i think it would.
It has 20 splines and the Regina oro has 20 splines and the diameter seems to be the same. Not sure but i have not come across another Regina freewheel with a different diameter and requiring a different Regina removal tool apart from the two pronged type.
Regards..Quizzer
"just out of curiosity will that remove the Regina ORO BX series of freewheels as above? "
Hi..Yes i think it would.
It has 20 splines and the Regina oro has 20 splines and the diameter seems to be the same. Not sure but i have not come across another Regina freewheel with a different diameter and requiring a different Regina removal tool apart from the two pronged type.
Regards..Quizzer
