Hi all
Yet another clearout to add to the for sale forum!
Suntour XC Pro rear derailleur, old school, missing 1 jockey wheel and pin, otherwise straight and feels solid with no play despite appearances, £10 posted - SOLD
Deore LX rear derailleur, old school, used but works fine £10 posted - SOLD
STX-RC rear derailleur, used but works fine, £10 posted
Brake lever from Raleigh Gold Burner, missing rear clamp (unless i find it) £3 posted
MX seat clamp, rusty bolt! £3 posted
BMX seat clamp, good nick, £3 posted
Old school stunt pegs, £3 posted
STX-RC front mech, £5 posted
Deore LX SiS 7spd thumb shifter, excellent condition for year£13 posted
(Neos mech not for sale)
Tektro purple cantilevers (woot!), good condition, £12 posted - SOLD
Suntour SE XC cantis, good condition, £15 posted levers below
(other stuff not for sale)
Suntour XC (Pro?) levers £13 or £25 for these with the cantis
Bar ends, teeny bit tatty £3 posted
Kona Lite bars, bit tatty would prob clean up ok, £8 posted
Art stem, 120mm 10deg rise, £10 posted
Art stem, guessing 50mm 45deg rise!, £10 posted
GT tubular stem, 140mm 8deg? rise, cable route through, from v.old school steel GT Avalanche£15 posted
bontrager stem and transX bars not for sale
http://img.photobucket.com/albums/v77/b ... CF6173.jpg
Fusion BMX 4 bolt stem, solid, vgc, £10 posted
Unknown old school splattered BMX chainring, seem to remember the paintjob from some bike but cant remember! 44t £8 posted
Solid billet aluminium BMX chainring, with bashguard, 42t £20 posted
Shimano Exage 300LX crankset, 46t BIG ring, £12 posted
STX microdrive crankset, rings rusting/flaking paint on outer steel ring, but inners good and still works fine £12 posted
both covered in a bit of overspray from leaving them out whilst doing my frame, should clean ok! might well do and get new pics looking at the above...
Ritchey saddle, slight tears, bent rails (could be straightened!) £5 posted
Karrimor RARE downtube bike frame bag, zip a bit stiff, otherwise excellent £15 posted
http://img.photobucket.com/albums/v77/b ... CF6179.jpg
http://img.photobucket.com/albums/v77/b ... CF6180.jpg
Zokes DH 110mm triple clamps (made by Marzocchi)
Very plush well damped action, elastomer/spring and either gas or oil, can't remember. Very strong, come with spare new heavier duty elastomers and manual. Self serviceable. Some slight pitting now on one upper stanchion, not on travel surface though. These were something like £260 new IIRC, even on sale. Good for a sturdy jump bike.
£40 posted
Deore LX 175mm crank, used, some paint on needs thinners to get off,£10 posted
DCD "Mr Crud" chain device, proper bright ano blue! vgc £10 posted
DMR lower chain device, I still run one of these on my single ring freeride bike in conjunction with upper device. Meant to suit triple rings, prob better with max 2 ring setup, as I seem to remember the height difference between 3 rings being a bit too much to setup correctly. This one needs flattening a bit; a lump hammer, some wood and a vice would easily sort! £10 posted
Aheadset converter - run your old threaded forks with an aheadset and a new stem! This one has collars, to allow fitment of either 1" or 1 1/8" forks and stems, either way round, £10 posted
offers considered on most stuff, please txt or phone 07528 - 611 - 364 for quickest response, or email dom(at)blinkituk.com
cheers
Dom
Yet another clearout to add to the for sale forum!
Suntour XC Pro rear derailleur, old school, missing 1 jockey wheel and pin, otherwise straight and feels solid with no play despite appearances, £10 posted - SOLD
Deore LX rear derailleur, old school, used but works fine £10 posted - SOLD
STX-RC rear derailleur, used but works fine, £10 posted
Brake lever from Raleigh Gold Burner, missing rear clamp (unless i find it) £3 posted
MX seat clamp, rusty bolt! £3 posted
BMX seat clamp, good nick, £3 posted
Old school stunt pegs, £3 posted
STX-RC front mech, £5 posted
Deore LX SiS 7spd thumb shifter, excellent condition for year£13 posted
(Neos mech not for sale)
Tektro purple cantilevers (woot!), good condition, £12 posted - SOLD
Suntour SE XC cantis, good condition, £15 posted levers below
(other stuff not for sale)
Suntour XC (Pro?) levers £13 or £25 for these with the cantis
Bar ends, teeny bit tatty £3 posted
Kona Lite bars, bit tatty would prob clean up ok, £8 posted
Art stem, 120mm 10deg rise, £10 posted
Art stem, guessing 50mm 45deg rise!, £10 posted
GT tubular stem, 140mm 8deg? rise, cable route through, from v.old school steel GT Avalanche£15 posted
bontrager stem and transX bars not for sale
http://img.photobucket.com/albums/v77/b ... CF6173.jpg
Fusion BMX 4 bolt stem, solid, vgc, £10 posted
Unknown old school splattered BMX chainring, seem to remember the paintjob from some bike but cant remember! 44t £8 posted
Solid billet aluminium BMX chainring, with bashguard, 42t £20 posted
Shimano Exage 300LX crankset, 46t BIG ring, £12 posted
STX microdrive crankset, rings rusting/flaking paint on outer steel ring, but inners good and still works fine £12 posted
both covered in a bit of overspray from leaving them out whilst doing my frame, should clean ok! might well do and get new pics looking at the above...
Ritchey saddle, slight tears, bent rails (could be straightened!) £5 posted
Karrimor RARE downtube bike frame bag, zip a bit stiff, otherwise excellent £15 posted
http://img.photobucket.com/albums/v77/b ... CF6179.jpg
http://img.photobucket.com/albums/v77/b ... CF6180.jpg
Zokes DH 110mm triple clamps (made by Marzocchi)
Very plush well damped action, elastomer/spring and either gas or oil, can't remember. Very strong, come with spare new heavier duty elastomers and manual. Self serviceable. Some slight pitting now on one upper stanchion, not on travel surface though. These were something like £260 new IIRC, even on sale. Good for a sturdy jump bike.
£40 posted
Deore LX 175mm crank, used, some paint on needs thinners to get off,£10 posted
DCD "Mr Crud" chain device, proper bright ano blue! vgc £10 posted
DMR lower chain device, I still run one of these on my single ring freeride bike in conjunction with upper device. Meant to suit triple rings, prob better with max 2 ring setup, as I seem to remember the height difference between 3 rings being a bit too much to setup correctly. This one needs flattening a bit; a lump hammer, some wood and a vice would easily sort! £10 posted
Aheadset converter - run your old threaded forks with an aheadset and a new stem! This one has collars, to allow fitment of either 1" or 1 1/8" forks and stems, either way round, £10 posted
offers considered on most stuff, please txt or phone 07528 - 611 - 364 for quickest response, or email dom(at)blinkituk.com
cheers
Dom
