Proflex 857 inc Hope C2, Ti-Glide, Pace RC36, XT

Moo

Retro Newbie
I recently purchased this as an almost complete bike with the intention of using it, but I've had a change of plan. Anyway, it's all stripped down and ready to be rebuilt, but I've decided to sell it,

DSC_0414.jpg


Ideally I'd like to sell all this in one go, but have listed it all separately to give full descriptions.
Pictures here https://picasaweb.google.com/101625653274429034872/Proflex02?authuser=0&feat=directlink
and here https://picasaweb.google.com/101625653274429034872/Proflex?authuser=0&feat=directlink

Full list as follows:

Proflex 857 Frame, very large, also includes one off bracket for Hope C2 brake with type 2 caliper mount (see below), old and worn but plenty of life left in her yet!

Hope C2 rear brake with type 2 caliper mount, suits 165mm disc, good condition but pads quite worn.

Hope C2 front brake with type 1 caliper mount and bracket for Pace RC36 Evo forks, suits 155mm disc, good condition and nearly new pads.

Pace RC36 Evo forks, just stripped and cleaned with fresh oil, stanchions show signs of wear but work fine.

Hope Ti-Glide disc hub on Mavic 317 disc rims, front and rear with original Hope skewers and adaptors and lock rings to suit above brakes, frame and forks.

Hope rotor and 5 spoke mounts 155mm disc

Hope rotor and 5 spoke mounts 165mm disc

Hope original square taper bottom bracket, brand new bearings, couple of marks from a ham-fisted mechanic slipping his spanner!

Shimano XT M737 8 speed cassette, 12t - 28t, used but was working fine with supplied Sachs PC51 chain.

Shimano XT M739 3 and 8 speed shifters, good used condition.

Shimano XT M739 rear mech, few scratches and jockey wheels slightly worn, includes Rollamajig

Shimano XT M739 chainset, 22/32/44t. Square taper, used with a couple of broken teeth on middle ring.

I'm not 100% sure what it's all worth but reckon some of the bits are rare and sought after in the retro world. £320 for the lot? (collection from Lancashire or possible localish delivery)
 
If you split rather than sell complete I'd be interested in the Bottom Bracket (width dependant) Casette/chain, bars and stem and the rear brake / rotors pending prices
 
same as above ill def 100000% have the front c2 brake off u not worried bout the disc but would need the bracket of the pace forks

so im goin to dib it ;)
 
BBC?????

Will give it a few more days and then asses if I'll split it, just didn't want the hassle of being paid in dribs and drabs, but if needs must...
 
i better dib the front wheel jus as i think the hope c2 mount takes a certain hub

thats if it gets split

tony
 
Back
Top