PARKPRE 925 TEAM 1994/5 import from Arizona 21" frame
This bike came to me Aug 2021 from Arizona, USA so had spent most of its life there. I had the chance of owning one so went for it however after building the bike up I soon discovered its far to big for me.
It’s a 21” frame the largest one they produced. To look at all the frame specs have a look at this web site link: PARKPRE MOUNTAIN BIKES - PARKPRE.COM It will also give you lots of other info on the ParkPre range.
It’s a wonderful light clean bike and not many about. It has been rebuilt back up in the last of couple weeks and now for sell.
Some details: As so see photos
If you need any more photos or details just ask. Just sad its too big for me.
It owns me £750 in all, so if you pick up Price £700 or may be able to deliver for the mileage cost, I'm in the BN15 area.
Price £600 or possible swap ?
I also have an original TANGE ProStruts forks and stem for the original set up for this bike however no re-bounce so will need to be rebuilt, you can have them for £35 with the bike or £50 once the bike has gone.
This bike came to me Aug 2021 from Arizona, USA so had spent most of its life there. I had the chance of owning one so went for it however after building the bike up I soon discovered its far to big for me.
It’s a 21” frame the largest one they produced. To look at all the frame specs have a look at this web site link: PARKPRE MOUNTAIN BIKES - PARKPRE.COM It will also give you lots of other info on the ParkPre range.
It’s a wonderful light clean bike and not many about. It has been rebuilt back up in the last of couple weeks and now for sell.
Some details: As so see photos
- Tange Ultimate Ultralight
- Ti plated finish frame
- NORBA Racing approved
- Rock Shoc Judy SL in very good working order, perfect re-bounce
- Shimano XT & LX group set
- Concept USA handlebars
- Moto Ace Stem
- White Industries crank shaft
- RANT peddles
- System Compound front hub and Shimano LX rear hub
- Stainless steel spokes
- Fast feather Ti racing seat post
- Sella Italia Flite Titanium seat
- Panaracer Fire XC pro
| FRAME SIZE | 21" |
| SS centre to centre | 19" |
| S centre to top | 22" |
| TT parallel | 23.4" |
| TT' top tube | 22.9" |
| FC front centre | 25" |
| RC rear centre | 16.9" |
| WB wheel base | 41.9" |
| off set | 1.97" |
| Bottom bracket height | 11.54" |
| head tube angle | 72° |
| seat tube angle | 72° |
| HT 1-1/8" head tube length | 5.3" |
| Fork steerer tube | 6.63" |
| Stand over height | 30.6" |
If you need any more photos or details just ask. Just sad its too big for me.
It owns me £750 in all, so if you pick up Price £700 or may be able to deliver for the mileage cost, I'm in the BN15 area.
Price £600 or possible swap ?
I also have an original TANGE ProStruts forks and stem for the original set up for this bike however no re-bounce so will need to be rebuilt, you can have them for £35 with the bike or £50 once the bike has gone.
Attachments
Last edited:
