http://i86.photobucket.com/albums/k81/The_Bear_01/_DSC3999.jpg[/
]
Looking to fund my RC300 build so alternatively I would consider swapping/PX for:
Hope Mono Mini full set, ideally 160/140mm
Decent 1 1/8" a-headset, must be black, dark grey/gunmetal
Pace RC45 stem similar colours (I have Ex. condition one in silver to trade)
Early RC35's, new elastomers last year, very plush. Good condition, unfortunately missing the brake rocker. 1" alu A-Head steerer 185mm crown to top. £70 posted sold
1" to 1 1/8" shims (use these forks in 1 1/8" headset) £10 posted -
[color=red]provisionally sold[/color]
Syncros 110 0 deg 1 1/8" stem, a few spots of corrosion and some areas on the decals are worn £20 posted [color=red]sold[/color]
Syncros 27.0 x 425mm seat post. Great condition, decal on opposite side not quite as good, no scratches, some light corrosion on clamp bolts. £50 posted [color=red]Sold[/color]
Syncros QR's 85g some scuffs but decent £10 posted [color=red]sold[/
130mm pcd middleburn spider £5 [color=red]sold[/color]
Seat post shims £3[color=red]sold[/color]
RC31 V-Brake mounts, excellent condition, £20 posted
Hope 31.8 seat post QR clamp £15 [color=red]sold[/color]
XT V Brake levers (I'll check the M number....) Some rubbed areas but no gouges, all shims present £18 posted[color=red]sold[/color]
XTR V Brakes, all four generally good but no pads and tatty noodles. Work well £18 posted [color=red]Sold - clearly they were a bargain!![/color]
Klein press fit BB axle, 125mm from my Attitude, replaced to upgrade to lighterTi version. Light surface corrosion, good tapers. £8 posted [color=red]sold[/color]
Horizontal/single speed RC200 drop outs with tensioners. Have had very little use. Would consider swap/PX with disc mount version £20 SOLD
Mavic 717's on Goldtec road hubs (130mm rear, I used them with the tensioners to achieve 135mm although the chainstays pulled up ok without)
Excellent condition, recently trued. Front radial, rear half radial. Freewheel will need a service, £110 SOLD
Middleburn RS1 (I believe) drive side crank arm. Says tandem on it which I always took to mean it was a l/h used to link both riders. I recently
discovered it has a r/h pedal thread in it!! Great condition, no spider attachment bolts 175mm £20 posted - L/H arm not available!!
Mavic braze on bottom pull front mech, originally fitted to my RC200 F1 when I bought it, outstanding condition for age, some light corrosion on some bolt heads and only mild chain scuff. £40 posted [color=red]Sold[/color
(cracked) 16" RC200 F1 frame in black [color=red]sold[/color]
I am in no doubt that some of these prices will be way off the mark, I researched everything and have priced accordingly for the items I could find. Everything else is a bit of a guess. Feel free to PM me if you know better ;)
As ever, Pay Pal gift or local pick up in Portsmouth if you wish.
