Starting to shift some of my stash as I need some space in the garage and recently became unemployed. I'll be adding to this thread frequently as I take pics of parts so please pop back from time to time for updates. Everything will be on ebay on Friday so grab a bargain while they are here.
Please RESPOND TO THE THREAD as it keeps it open and fair.
Prices include UK postage. Will post overseas if I have to, but not had much luck with overseas postage lately so would prefer not to.
More pictures can be found here: https://flic.kr/s/aHskwpeQLd. Click on the images below to reveal larger ones.
Retro fork crown/steerer unit - £20
Not sure what these are from. I bought them for a Judy but a) they are for forks with stantions that are closer together than a judy and b) the internal diameter of the stantion is bigger than a judy (I'd say 28mm). Owes me more, but selling for £20. Long 200mm+ steerer at 1 1/8.
LX rear mech and cantis - £20
Good condition rear mech and one ends worth of brakes. Pads are the carrier/separate pad style.
Suntour bits
Suntour hub (top left). 32H, MD-8 I believe, not sure of model - £15
Suntour xc-comp hub (top middle). 32H, - £15
Suntour XC-pro cranks (right). 110 BCD, 175 mm arms. Some marks from use as pictured, comes with chain ring bolts and the all important granny ring spacers - £35
Suntour chain rings (Power flo I believe). 46t and market SR 316. Plenty of life left, £5 each.
Suntour cassette - APII. 11-24T. A but dirty but will clean up nicely. Very little wear to teeth, last two cogs are the lock ring - £15
Group shot, more detailed pics in album: https://flic.kr/s/aHskwpeQLd
Cassettes, BBs and other drive train stuff
New SRAM PG730 (top left). 12-32, 7 speed - £10
NOS HG50 shimano cassette (top middle). Lovely item, lovely lock ring too, Never used, still boxed (which is a bit tatty). 11-30 and 8 speed - £20
Grunge guard for front mech (top right). Keep the crud out of your top swing, top pull front mech - £10
Shimano XT M737 cassette #3 (middle right). Great condition, about the same as #2 behind the dirt. Should still take a new chain in it's stride though. Incorrect, but 11t lock ring included. 11-28, 8 speed. U4 type R - £16
Bullet bros chain tensioner (far right). Black, pretty clean all round with just marks where the QR has touched it - £12
Shimano 9 speed cassette (bottom left). I think this is an LX one, I used it briefly on a bike before upgrading so has almost zero miles and therefore wear. No alloy spider on this one, the smallest two rings are the only separates. Comes with a lock ring as per the replacement ones on the two xt ones though not pictured - £7
Shimano UN51 BB (bottom middle). 73MM shell, 113mm axle (approx). Looks grubby but that's copper grease. Has metal threaded sections both ends, so no worries about brittle plastic. Very smooth bearings too - £8.
NOS M900 cable lubers by Potts design USA (bottom right). Keep your m900 shifting as crisp as possible with these - £15
Group shot, more detailed pics in album: https://flic.kr/s/aHskwpeQLd
Magura brake boosters in lovely anno blue - £10
XT M739 stis - £45 (ON HOLD) Absolutely immaculate. Gutted to let these go.
XT front mech - £10 34.6 clamp.
Brand new in box XT shark fin - £15 Never been taken out of the packet.
Dia-Compe 987 canti brakes (new) and PC7 7 levers (used) - £40
SRAM grip shift
Attack and 200 - £postage
Microshift 7 speed - £10
KARMA items
Free with any purchase, or just pay postage:
Pedals - Not sure what make, but cage can be removed. Could do with a regrease.
Grips - not sure of make, but very little wear. Looks like channels at each end for a zip tie.
Toe clips and nuts/bolts - not sure of make but nice and tidy, barly used.
PEDROS USA Blackwalls grips - not much wear. Should probably hang on to them, but....
1 inch control tech stem - Removable face place (with decal). Issue is that steerer clamping bolts are stuck.
Exage trail bits - canti brakes (no springs or back covers), straddle wires x 2, cable pinch bolt x 1 and 2 x exage brake lever rubber hoods.
7 speed shimano cassette - very dirty but low wear/use. No lock ring
A couple of skewers - do the job in tended. Not sure of brand.
12 inch inner tubes x 3 - used/new, can't remember. Bought for our i-candy buggy until some scrote stole it from outside our nursery. No use to me now, but maybe to someone?
SOLD/GONE:
Scott AT-4 bars, NOS - £50
What more can I say, a NOS set of these awesome bars allowing all sorts of hand positions. Comes with an additional thing that joing the bars, as I wasn't sure I wanted to go the standard luminous yellow, so a black one is included.
Mavic spoke tools £postage
Silver skewer - £postage
XTm737 skewer. Slight rusting to the back that will probably polish out - £postage
Shimano XT M737 cassette #1 (middle left). Great condition, should easily take a new chain and last years. 11-28, 8 speed. X3 type R - £22
Shimano XT M737 cassette #2 (middle middle). Great condition, though not quite as nice as #1. Should still take a new chain in it's stride though. Incorrect, but 11t lock ring included. 11-28, 8 speed. V1 type R - £16
Couple of 12T lock rings. Don't have any cassettes with 12T to my knowledge - postage only.
Magura booster in silver - £postage
XT M737 cassette - £20 A bit grubby but hardly used. 11-28. Not sure what the plastic ring and metal washer are for but they came off the wheel with the cassette.
SRT-800 x 3 - £20. Two rears and one front I think. Usual cracking on 2 of the three, one uncracked.
XT (I think) rear skewer - £5 Used with a few marks but sound.
KARMA: Specialised seat qr - nice actually - marked as 35 - GONE
KARMA: Shimano UN26 BB - 68x113 - Missing the fitting from one end. Nice and smooth though.
Suntour Accushift gear cable for front and rear. Outers and inners. Nos in packet - £10
Suntour XC pro grease guard BB. 122mm axle (approx) for XC pro non-MD chainset (like the one above). 68mm BB shell fitting. Nice and smooth bearings, seals all there too. Very little use - £30
Please RESPOND TO THE THREAD as it keeps it open and fair.
Prices include UK postage. Will post overseas if I have to, but not had much luck with overseas postage lately so would prefer not to.
More pictures can be found here: https://flic.kr/s/aHskwpeQLd. Click on the images below to reveal larger ones.
Retro fork crown/steerer unit - £20
Not sure what these are from. I bought them for a Judy but a) they are for forks with stantions that are closer together than a judy and b) the internal diameter of the stantion is bigger than a judy (I'd say 28mm). Owes me more, but selling for £20. Long 200mm+ steerer at 1 1/8.
LX rear mech and cantis - £20
Good condition rear mech and one ends worth of brakes. Pads are the carrier/separate pad style.
Suntour bits
Suntour hub (top left). 32H, MD-8 I believe, not sure of model - £15
Suntour xc-comp hub (top middle). 32H, - £15
Suntour XC-pro cranks (right). 110 BCD, 175 mm arms. Some marks from use as pictured, comes with chain ring bolts and the all important granny ring spacers - £35
Suntour chain rings (Power flo I believe). 46t and market SR 316. Plenty of life left, £5 each.
Suntour cassette - APII. 11-24T. A but dirty but will clean up nicely. Very little wear to teeth, last two cogs are the lock ring - £15
Group shot, more detailed pics in album: https://flic.kr/s/aHskwpeQLd
Cassettes, BBs and other drive train stuff
New SRAM PG730 (top left). 12-32, 7 speed - £10
NOS HG50 shimano cassette (top middle). Lovely item, lovely lock ring too, Never used, still boxed (which is a bit tatty). 11-30 and 8 speed - £20
Grunge guard for front mech (top right). Keep the crud out of your top swing, top pull front mech - £10
Shimano XT M737 cassette #3 (middle right). Great condition, about the same as #2 behind the dirt. Should still take a new chain in it's stride though. Incorrect, but 11t lock ring included. 11-28, 8 speed. U4 type R - £16
Bullet bros chain tensioner (far right). Black, pretty clean all round with just marks where the QR has touched it - £12
Shimano 9 speed cassette (bottom left). I think this is an LX one, I used it briefly on a bike before upgrading so has almost zero miles and therefore wear. No alloy spider on this one, the smallest two rings are the only separates. Comes with a lock ring as per the replacement ones on the two xt ones though not pictured - £7
Shimano UN51 BB (bottom middle). 73MM shell, 113mm axle (approx). Looks grubby but that's copper grease. Has metal threaded sections both ends, so no worries about brittle plastic. Very smooth bearings too - £8.
NOS M900 cable lubers by Potts design USA (bottom right). Keep your m900 shifting as crisp as possible with these - £15
Group shot, more detailed pics in album: https://flic.kr/s/aHskwpeQLd
Magura brake boosters in lovely anno blue - £10
XT M739 stis - £45 (ON HOLD) Absolutely immaculate. Gutted to let these go.
XT front mech - £10 34.6 clamp.
Brand new in box XT shark fin - £15 Never been taken out of the packet.
Dia-Compe 987 canti brakes (new) and PC7 7 levers (used) - £40
SRAM grip shift
Attack and 200 - £postage
Microshift 7 speed - £10
KARMA items
Free with any purchase, or just pay postage:
Pedals - Not sure what make, but cage can be removed. Could do with a regrease.
Grips - not sure of make, but very little wear. Looks like channels at each end for a zip tie.
Toe clips and nuts/bolts - not sure of make but nice and tidy, barly used.
PEDROS USA Blackwalls grips - not much wear. Should probably hang on to them, but....
1 inch control tech stem - Removable face place (with decal). Issue is that steerer clamping bolts are stuck.
Exage trail bits - canti brakes (no springs or back covers), straddle wires x 2, cable pinch bolt x 1 and 2 x exage brake lever rubber hoods.
7 speed shimano cassette - very dirty but low wear/use. No lock ring
A couple of skewers - do the job in tended. Not sure of brand.
12 inch inner tubes x 3 - used/new, can't remember. Bought for our i-candy buggy until some scrote stole it from outside our nursery. No use to me now, but maybe to someone?
SOLD/GONE:
Scott AT-4 bars, NOS - £50
What more can I say, a NOS set of these awesome bars allowing all sorts of hand positions. Comes with an additional thing that joing the bars, as I wasn't sure I wanted to go the standard luminous yellow, so a black one is included.
Mavic spoke tools £postage
Silver skewer - £postage
XTm737 skewer. Slight rusting to the back that will probably polish out - £postage
Shimano XT M737 cassette #1 (middle left). Great condition, should easily take a new chain and last years. 11-28, 8 speed. X3 type R - £22
Shimano XT M737 cassette #2 (middle middle). Great condition, though not quite as nice as #1. Should still take a new chain in it's stride though. Incorrect, but 11t lock ring included. 11-28, 8 speed. V1 type R - £16
Couple of 12T lock rings. Don't have any cassettes with 12T to my knowledge - postage only.
Magura booster in silver - £postage
XT M737 cassette - £20 A bit grubby but hardly used. 11-28. Not sure what the plastic ring and metal washer are for but they came off the wheel with the cassette.
SRT-800 x 3 - £20. Two rears and one front I think. Usual cracking on 2 of the three, one uncracked.
XT (I think) rear skewer - £5 Used with a few marks but sound.
KARMA: Specialised seat qr - nice actually - marked as 35 - GONE
KARMA: Shimano UN26 BB - 68x113 - Missing the fitting from one end. Nice and smooth though.
Suntour Accushift gear cable for front and rear. Outers and inners. Nos in packet - £10
Suntour XC pro grease guard BB. 122mm axle (approx) for XC pro non-MD chainset (like the one above). 68mm BB shell fitting. Nice and smooth bearings, seals all there too. Very little use - £30
