- Feedback
- View
Righty ho then folks, I will start by saying that this is not much in the way of high end stuff, but it has useful life left in it all the same. Stripping and passing on for a friend as I don't like to see this stuff sent to the tip without giving it a chance. That said, if it doesn't find new homes, it may well end up there anyway :cry:
To add to this, it is all going for karma + postage, especially as this is my first 'sale', so to speak, and I want to be kind to the community!
First up, a CR-MO Muddy Fox Pathfinder F&F, including stem, headset and BB. 15" - 15.5" inch frame C-C, 18" C-T, with a 22" C-C top tube. No cracks or dents, but could do with a wash! The BB is pretty well in there and is reasonably gritty. The LGF method of removal will probably get it out though. The headset is also in need of attention, but nothing that some bearing grease and time couldnt fix. Adopted by radjatoe
Next up, some shimano canti's. Just stamped with 'Shimano' on the rear, no other identifiable markings. All present and correct though. Adopted by wired99
Shimano Altus C-10 cranks. 170 flavour. On the end of which are some Deore LX pedals, cosmetically tired, but perfectly functioning! Come with both crank bolts and the little plastic caps to make it all pretty :roll: Adopted by i believe in fixies
Shimano Altus C-10 front mech. Stamped 28.0 and 28.6 inside the seatpost clamp. Bottom pull variety. Could use a drop of grease though :?
Gear/brake levers - Shimano Altus A10 (ST-AT10). Both in working order with positive clicks on the gear shifters. Adopted by dazzawazza
Tranz-X 'Zanzibar' anodised bar. 563mm. Reasonable condition, most marks will be covered with a stem/grips/brakes and shifters anyway. Adopted by dnbmatt28
Tranz-X bar ends. Well used, but still sound. Heavily marked, but good for a hack bike or something, surely?! Adopted by dnbmatt28
Muddy Fox saddle and Kalloy seatpost. Frankly, the saddle is pretty worn, with a hefty bit of damage to the front end. Seatpost is fine though. 26.4 post. Again, probably ok for a hack bike/station bike kinda thing.
EDIT - The seatpost is actually covered in a sticky (what must have once been?!) lubricant and will clean up ok. I am just too lazy to do it myself, sorry!
And finally, an ano seat QR. Pretty good condition. The lever hinge, as it where, is rusty, but it is perfectly functional. Adopted by dnbmatt28
So there we have it. Express interest (if there is going to be any?!) in the thread then PM.
Cheers
Dan
To add to this, it is all going for karma + postage, especially as this is my first 'sale', so to speak, and I want to be kind to the community!
First up, a CR-MO Muddy Fox Pathfinder F&F, including stem, headset and BB. 15" - 15.5" inch frame C-C, 18" C-T, with a 22" C-C top tube. No cracks or dents, but could do with a wash! The BB is pretty well in there and is reasonably gritty. The LGF method of removal will probably get it out though. The headset is also in need of attention, but nothing that some bearing grease and time couldnt fix. Adopted by radjatoe
Next up, some shimano canti's. Just stamped with 'Shimano' on the rear, no other identifiable markings. All present and correct though. Adopted by wired99
Shimano Altus C-10 cranks. 170 flavour. On the end of which are some Deore LX pedals, cosmetically tired, but perfectly functioning! Come with both crank bolts and the little plastic caps to make it all pretty :roll: Adopted by i believe in fixies
Shimano Altus C-10 front mech. Stamped 28.0 and 28.6 inside the seatpost clamp. Bottom pull variety. Could use a drop of grease though :?
Gear/brake levers - Shimano Altus A10 (ST-AT10). Both in working order with positive clicks on the gear shifters. Adopted by dazzawazza
Tranz-X 'Zanzibar' anodised bar. 563mm. Reasonable condition, most marks will be covered with a stem/grips/brakes and shifters anyway. Adopted by dnbmatt28
Tranz-X bar ends. Well used, but still sound. Heavily marked, but good for a hack bike or something, surely?! Adopted by dnbmatt28
Muddy Fox saddle and Kalloy seatpost. Frankly, the saddle is pretty worn, with a hefty bit of damage to the front end. Seatpost is fine though. 26.4 post. Again, probably ok for a hack bike/station bike kinda thing.
EDIT - The seatpost is actually covered in a sticky (what must have once been?!) lubricant and will clean up ok. I am just too lazy to do it myself, sorry!
And finally, an ano seat QR. Pretty good condition. The lever hinge, as it where, is rusty, but it is perfectly functional. Adopted by dnbmatt28
So there we have it. Express interest (if there is going to be any?!) in the thread then PM.
Cheers
Dan
