Manitou X-vert Carbon Help!!

[O1i1]

Help!
I need a bolt through axle for my X-Vert Carbon forks. Has anyone got one?
Or
If you have a pair of these forks, please can you take some pics of the axle so i can try to get one made... would make my day!!

It seems that the gap between the fork legs are 120mm wide, but 20mm hubs are 110mm, is there a spacer on the axle or hub i need?

Any help would be greatly appreciated

Cheers

Oli

These are the closest pics i have found on the web. need close ups of the axle itself...

 

[O1i1]

Hi, from memory, the axle has a thicker diameter that clamps to the forks and the hub sits against that. But it’s been a while!! I’m also after an axle for the same forks so please let me know if you find anything

 

[LeeDevelopment]

The axle sits flush to the forks when fitted correctly. The hub required is not a 'boost' variant, it takes a normal 90's 20mm bolt through hub. I ran Hope Big Uns with my team riders' bikes.

Why not bite the bullet and give Manitou a ring Stateside?