Mafac Brake lever adjuster

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks Jim for the effort but they both look bent at the end which seems to be a common problem there is a guy on here who repairs them I have messaged him and I am waiting for a reply.
 
I have now sorted the adjuster screw problem I have made 2 as the other brass one was bent and weak .I used 2 M6 steel screws and nuts
1. super glued a nut on each screw
2. Ground down the nut to the suitable size.
3. Cut to length .
4.Tomorrow I will take to a guy up the road to have the inner cable hole drilled through on his lathe.
I hope this might help anyone else who needs an adjuster screw.
 

Attachments

  • maf1.jpg
    maf1.jpg
    418.4 KB · Views: 10
  • maf2.jpg
    maf2.jpg
    433.6 KB · Views: 10

Latest posts

Back
Top