M900 + Ti stem + more

[Wold Ranger]

As I've now "swapped" the Explosif frame have the following parts available Pics will come later, but register interest here first, then pm me after.

M 900 full set of Canti's, logo's still very good, with original pads and Titanium boss bolts (these cost me £8 a bolt!) with straddle cables £65 posted.

M900 front mech, tidy 28.6 bottom pull £40

M900 mid cage rear, very tidy, new Jockey wheels £65

L &M stardrive cranks good polished finish, tapers very good, there is a casting mark on the driveside crank arm centre, but this is not a crack and have ridden these no problem for 6 months. 94bcdx170 £45 posted


Custom ordered Titanium 6/4 stem, 4 bolt faceplate 80mm reach 5 deg rise standard clamp inch and an eighth steerer 131g on my scales ,never ridden £75 posted GONE thanks

USE 25x330mm seatpost silver, very good order with new stainless bolts £35 or swap for a black one same.

 

[Faghetaboutit]

Custom ordered Titanium 6/4 stem, 4 bolt faceplate 80mm reach 5 deg rise standard clamp inch and an eighth steerer 131g on my scales ,never ridden £75 posted

is this the stem off the hei hei build? if so who custom made this for you.

cheers

 

[Wold Ranger]

Stem

Ordered it off some outfit on Ebay, they are'nt on there anymore, paid £90 for it, using a Kore Elite instead.

 

[Faghetaboutit]

damn, want 1 made myself with loads of rise :twisted:

 

[CHASE76]

interested in cranks and canti's PM sent

 

[Wold Ranger]

M900

All still for sale. :cry:

 

[Jens_BM]

Will You swap Your M-900 frontmech 28.6 dp, for a modern Funn F2 discbrakeset with carbon levers, bleedkit but no discs?

 

[nodding dog]

Interested in the ti stem.

PM inbound.

 

[Wold Ranger]

Will You swap Your M-900 frontmech 28.6 dp, for a modern Funn F2 discbrakeset with carbon levers, bleedkit but no discs?

Sorry, strict rule in my workshop, nothing post '98 the mech is bottom pull as all M900 were, not dual pull.

 

[davroos]

Interested in the cantis, PM coming