Link bolt / bolt kit + mech hanger for 04 specialized enduro

[ishaw]

As title, I've got a bolt with a rounded allen head so need to replace it once I get it out. Anyone got a spare kicking about or even a bolt kit for the bike?

I'm also short a mech hanger. Anyone got one or know what one I need as I don't have the old one or a part number.

I'd take a trashed frame if the bolts and mech hanger are salvageable.

 

[development_cycle]

Re:

If you let me know the details I might be able to help you out. Not sure as to cross model compatibility as never had an Enduro but have two epics and two stumpy's and a fair few mech hangers so may be what you need in there.

Do you know part numbers or have accurate pics so I can check against the spares bin Ian?

 

[ishaw]

Re:

That's great. I've spent a lot of time looking online and from what I can tell, some parts do look the same from other fsr and epic frames. I'll dig out the part numbers as I've a chart/diagram. I'll update shortly.

Don't suppose you've replaced the horst link bearings on any of yours? They look like they should press out but I've read that there is a collar in the middle that's part of the frame so perhaps not as simple as I first thought.

 

[development_cycle]

Re:

Yes I have and yes I found out the hard way, at least one came clean off!

 

[ishaw]

Re:

Here's a link to the manual.

http://www.sillygrin.co.uk/techstuff/ki ... manual.pdf

The part numbers/descriptions I'm looking for are:

2F: Shock Link @ Seatstay Pivot Bolt | Black Alloy Bolt - 10mm O.D. x 20mm Length (shoulder - 6mm, threads - 14mm)

According to the Evans website, the mech hanger I need is:

The Specialized 9894-4206 Mech Hanger (D) is compatible with 2004-2005 Hardrock (Aggro), 2004-2005 Rockhopper, 2003-2005 Stumpjumper, 2003-2005 S-Works M5 Hardtail, 2004-2005 Hotrock 24 inch A1 FS, 2002-2005 Enduro & S-Works Full Suspension, 2002-2005 Epic & S-Works Full Suspension models.

 

[development_cycle]

Re:

Will take a look Ian, I do quite possibly have both though.

I'll let you know.

 

[ishaw]

Re: Re:

Will take a look Ian, I do quite possibly have both though.

I'll let you know.

That would be awesome, thanks. I was about to buy some so I'll hold off.

 

[development_cycle]

Re:

Ian are you sure that's the correct mech hanger?

Was trying to see if my friend (ex Enduro rider) had one spare, but on looking it up on BETD website they say it's this one http://www.mountainbikecomponents.co.uk ... hanger-509

 

[ishaw]

Thanks again for your efforts. Its definitely a 2 bolt one.The s-works is an 04 frame but shares a lot with the fsr that began life in 02 and ran until the next version came out in 05. Feel like a bit of an enduro geek now.

 

[development_cycle]

Re:

Think the betd website must be wrong then as I just noticed it has the same hanger listed for two of my bikes and I know I bought the same one you're looking for. My friend thinks he probably has one but also thinks it'll be a couple of weeks before he has a good shed clear out