mechanical_vandal
Retro Guru
Has had a very nice conversion to track ends under a previous owner. Cable guides have been reduced/replaced so there is now just a single pair of stops on the top tube for the brake cable.
Must have had a full respray at the time of the conversion as the paint job is seamless. Its been put through its paces by me so it is now sporting marks and chips all over as should be expected of a used mtb but the paint is still very nice.
The decals are '97 but frame might be a '96.
Matching Project 2 included.
Will also include the Salsa Fliplock qr seatclamp.
I think it should officially take a 27.0 post and this is what it came with when I bought it but I have found a 27.2 to be a better fit.
BB threads are nice and clean and the shell width is 68mm.
Seat tube is 19" centre to top, 16" centre to centre. Top tube is 22", headtube 5" or just shy of 130mm.
Fork a2c is 410mm and there's 210mm of steerer on the forks which is plenty to fit this frame with at least a 10mm spacer to play with, possibly more depending on your headset.
£100 + postage + fees if paying by paypal.
Must have had a full respray at the time of the conversion as the paint job is seamless. Its been put through its paces by me so it is now sporting marks and chips all over as should be expected of a used mtb but the paint is still very nice.
The decals are '97 but frame might be a '96.
Matching Project 2 included.
Will also include the Salsa Fliplock qr seatclamp.
I think it should officially take a 27.0 post and this is what it came with when I bought it but I have found a 27.2 to be a better fit.
BB threads are nice and clean and the shell width is 68mm.
Seat tube is 19" centre to top, 16" centre to centre. Top tube is 22", headtube 5" or just shy of 130mm.
Fork a2c is 410mm and there's 210mm of steerer on the forks which is plenty to fit this frame with at least a 10mm spacer to play with, possibly more depending on your headset.
£100 + postage + fees if paying by paypal.
