Huge Clear-out. Some Retro bits, some not

thepodge

Dirt Disciple
Hi,

I'm still selling a load of things
Email me on podge1000@hotmail.com for any questions or more pics.

Loads Of Photos HERE

Anything that will fit in a Jiffy bag includes postage
Anything bigger than a Jiffy bag doesn’t include postage
Payment is cash on collection or paypal gift
Prices are negotiable
All items will be sent out the first Friday or Saturday after payment has cleared.
I’m based in Sheffield & work in the Peak so if anyone wants collection / delivery just let me know.

Frames & Forks
• Fox 32 F120 RL 120mm travel, 1/18th Steerer, lockout & 15mm Thru-axle – sent to loco for a service, he “thinks” the stanchions might be coming unglued from the crown but has never seen that happen on this fork of that year. spares or repairs - £100 SOLD
• Rock Shox J1 Forks – 1 1/8th 275mm Long Steerer, Needs Work But Ok For Beater / Pub Bike, V & Disc - £10
• RST hi5 forks – ok condition, original elastomers and upgraded springs, V brake only - £10 SOLD
• S&M Bennett frame, includes seat post, seat clamp & rear brakes - £30 SOLD
• S&M pitch forks, sfn installed - £15 SOLD
• Sunn BMIX – Classic retro jump frame (red) & forks (yellow), includes headset, seat post, Seat clamp, Race Face Ride DH cranks & bb converter - £85 SOLD


Transmission
• 24t 5 Bolt Chainring – Unused - £5
• Diamond Back BMX Cranks – Chrome 3pc With Bb, 175mm Length, Brand New In Box - £30
• Fusion 44t BMX Chainring- Used - £5 SOLD
• Middleburn Chainring 32t Silver - Hardly Used - £25
• Race Face Deus XC 22t Chainring – Used - £10
• Race Face deus xc 42t chainring – used - £5 SOLD
• Shimano Deore 32t Chainring – Unused - £10
• Shimano Deore 42t Chainring – Unused – £10
• Shimano XT Front Mech – 34.9 Clamp - £15
• Track End Gear Hangers. These Are Chain Tugs With Built In Gear Hangers Letting You Run Gears On Track End / Sliding Dropout / Singlespeed Frames - £5 Each

Steering, Seating & Pedalling
• Cut down BMX bars – classic 3pc bars, blue - £5 SOLD
• DMR Saddle – Couple Of Scuff & Scrapes But Otherwise Good - £5
• Kooka bars – black, oversize clamp, 685mm length - £5 SOLD
• Kooka stem – black 1 1/8th steerer, 90mm length, oversize bar clamp - £5 SOLD

• Look Road Pedals – Can’t Find A Model Number But Black And Plastic So Not Too Fancy But Still Work - £5
• Marin Flat Handlebar 560mm Wide, Standard Bar Clamp - £5
• Race Face Evolve XC Stem – Black, 90mm Length, Oversized Clamp - £20

Brakes
• Avid V Brakes (Black) – Arms Only – £5
• Avid V Brakes (Silver) – Comes With Pads - £5
• Hayes Stoker Trail 160 6 Bolt Disc Rotor – £10
• Magura Julie - 180 4 Bolt Rotor - £5

Wheels & Tyres
• 26” Cannondale / Coda Expert Rear Hub On Dt Swiss Disc Only Rim, Running Smooth & Straight - £20
• 26” Front Wheel – 32 Hole Weinmann Zac 19 V Compatible Rims On Rozklad (?) Bolt Up Hubs - Hub Needs New Bearings, Rims Are Straight - £15
• 26” Rear Wheel – 32 Hole Alex Aldm-24 V Compatible Rims On Diamond Back 110 Spaced (BMX), (Free / Free) Hubs – Hubs Need New Bearings, Rims Are Straight, Spokes Are Butted - £15
48 spoke peregrine fat jack’s 110 spaced hub on chromed steel peregrine rim – comes with 16t freewheel & 14mm axel - £20 SOLD
• Cannondale lefty hub - £10 SOLD

• DMR 2.2 Moto RT Tyre – Used But Loads Of Life Left - £10
• Kenda 2.1 Small Block Eight – Used But Good Life In It Yet - £15
• Rear Hub – 120 Spaced, Was A Flip Flop / Free Fixed Hub But The Fixed Side Has Stripped Threads, The Freewheel Side Has Never Been Used And The Bearings Still Run Nice And Smooth - £10
• rear wheel – WTB hub on WTB lazer disc trail rim – hub in very good condition, rim is slightly out of true - £40 SOLD
• Spokes – Straight Gauge 290mm Long, These Have Been Used So Best As Backups Or Something I Suppose
 
Ah, just noticed that this is in the pre97 for sale. Its been a whiles since I've been here and didn't realise there were a few different for sale sections.

Mods please feel free to move this to where ever is best.

thanks
 
Rock Shox J1 forks – needs work but ok for beater / pub bike, V & Disc - £10

How long it the steerer and assume its 1 1/8th?

What work do they need chap?
 
Hi, the steerer is 1 1/8th & 275 long.

The fork stantions look fine at the bottom but have some kind of glue on the top (I think from packing tape or similar) and the seals could probably do with being replaced plus a general home service
 
Bugger, just seen. Bit more modern then I was after.

Bargain though. But I will pass. Sorry to waste your time :oops:
 
There are a couple of photos here

https://picasaweb.google.com/106608...uthuser=0&feat=directlink#5680522238640652130

If you want any more and of any specific areas of the forks then just let me know and I'll sort them.

Not 100% sure on the travel to be honest. I never used these forks, I found some better ones for not much more and used them instead. If you know how I can work out the travel then let me know as my attempts with pushing them down next to a tape measure isn't really giving a proper answer
 
Can I see pictures of the following please:

•Diamond Back cranks – chrome 3pc with bb, 175mm Length, brand new in box - £30
•Kooka bars – black, oversize clamp, 685mm length - £5
•Kooka stem – black 1 1/8th steerer, 90mm length, oversize bar clamp - £5

Also have you a picture of the potential unglueing area of the Fox forks please.

Chris
 
Back
Top