Found this forum a while back when I was last looking to sort the garage out. So, before I put the items on eBay...
Pictures attached at bottom.
Marzocchi Bomber Z1 BAM Forks
- They have a IS disc-mount and V-brake/Magura brake mounts.
- 187mm Steerer Length.
- 110mm travel IIRC (possibly 100mm).
- *No* marks or scratches on the stanchions.
- Fork weight: 2.09Kg
I bought them in 1999 and still have the receipt for £310. Some scratches on the back of lower legs and on the disc mount and QR dropouts. They’ve had about 3 years use, other then that, they have been sat in my garage. I would personally service them before use but that’s up to you. Compared to some I’ve seen advertised, I think they’re in very good condition. I also have some vintage fork oil I found
£70 + £12 P&P
---------------------------------------------------------------------------------
Magura HS33 Black Brakes + Spares - Excellent condition
Complete Black and Silver HS33 Front and Rear Brake Set with Twin Brake boosters. I think I bought them in 2009 as a stop gap until I saved up for a new bike. They haven’t had much use at all, probably 6 months at most.
Spare HS33 yellow brake and two boosters with 50% pads.
Spare koolstop pads brand new.
Spare koolstop pads 10% worn.
Spare brake loop-over hose.
Spare front break hose.
I’m sure I had some mineral oil in the garage for them, so *if* I find that ill put that in too.
£90 + £10 P&P
---------------------------------------------------------------------------------
CNC Stem:
Very solid stem and was a copy of the Azonic stems popular around 2000.
- Steerer tube: 1.1/8"
- Bar Diameter: 25.4mm
- Weight: 260g
I’m not sure on the rise and reach but think they are 65mm and 30deg.
£5 + £3 P&P
---------------------------------------------------------------------------------
Azonic PDW Double Wall 1.5” Riser Bars
£7 + £3 P&P
---------------------------------------------------------------------------------
Odyssey Apache Helmet Size Small
Never had any knocks although there’s a few scratches from rolling around the garage
10 P&P Only as I think it’s a waste for it to end up in the bin. Just to be clear – I’ve owned it from new and never fallen off onto my head.
---------------------------------------------------------------------------------
Wheels Pair - Shimano LX hubs and D521 Rims.
I think they’re from 2000. The front wheel is in good condition. The rear could do with a true but it’s only very slightly out. The teeth on the 8 speed cassette are worn so ignore that.
£20 for the pair. Delivery would be about £12
---------------------------------------------------------------------------------
All prices are gift payments via paypal, assuming that still works, otherwise there are paypal fees to consider.
Thanks,
Rob
Pictures attached at bottom.
Marzocchi Bomber Z1 BAM Forks
- They have a IS disc-mount and V-brake/Magura brake mounts.
- 187mm Steerer Length.
- 110mm travel IIRC (possibly 100mm).
- *No* marks or scratches on the stanchions.
- Fork weight: 2.09Kg
I bought them in 1999 and still have the receipt for £310. Some scratches on the back of lower legs and on the disc mount and QR dropouts. They’ve had about 3 years use, other then that, they have been sat in my garage. I would personally service them before use but that’s up to you. Compared to some I’ve seen advertised, I think they’re in very good condition. I also have some vintage fork oil I found
£70 + £12 P&P
---------------------------------------------------------------------------------
Magura HS33 Black Brakes + Spares - Excellent condition
Complete Black and Silver HS33 Front and Rear Brake Set with Twin Brake boosters. I think I bought them in 2009 as a stop gap until I saved up for a new bike. They haven’t had much use at all, probably 6 months at most.
Spare HS33 yellow brake and two boosters with 50% pads.
Spare koolstop pads brand new.
Spare koolstop pads 10% worn.
Spare brake loop-over hose.
Spare front break hose.
I’m sure I had some mineral oil in the garage for them, so *if* I find that ill put that in too.
£90 + £10 P&P
---------------------------------------------------------------------------------
CNC Stem:
Very solid stem and was a copy of the Azonic stems popular around 2000.
- Steerer tube: 1.1/8"
- Bar Diameter: 25.4mm
- Weight: 260g
I’m not sure on the rise and reach but think they are 65mm and 30deg.
£5 + £3 P&P
---------------------------------------------------------------------------------
Azonic PDW Double Wall 1.5” Riser Bars
£7 + £3 P&P
---------------------------------------------------------------------------------
Odyssey Apache Helmet Size Small
Never had any knocks although there’s a few scratches from rolling around the garage
10 P&P Only as I think it’s a waste for it to end up in the bin. Just to be clear – I’ve owned it from new and never fallen off onto my head.
---------------------------------------------------------------------------------
Wheels Pair - Shimano LX hubs and D521 Rims.
I think they’re from 2000. The front wheel is in good condition. The rear could do with a true but it’s only very slightly out. The teeth on the 8 speed cassette are worn so ignore that.
£20 for the pair. Delivery would be about £12
---------------------------------------------------------------------------------
All prices are gift payments via paypal, assuming that still works, otherwise there are paypal fees to consider.
Thanks,
Rob
