FS: lots of weight weenie parts!

[red_riviera]

http://www.retrobike.co.uk/forum/viewtopic.php?p=1666302#1666302

 

[red_riviera]

KARMA'd:

Suntour XCD front hub, 36H to Jamis Diablo



SOLD:


NEW SRAM X Front mech, top mount, top / bottom pull, 34.9mm clamp £11
One pair Continental Speed King Supersonic 26 x 2.3 . Just one dry ride old... cost over £70, asking £40 posted.
PAIR (2) Blackburn Comp superlight silver anodised cages - 1 used slightly, 1 fitted but never actually seen a bottle. £12 the pair
Felt 6061 Inline seatpost 30.9mm x 350mm. £12
RXL white QR seat clamp 34.9mm £4
PACE V-brake / canti mounts for RC31 carbon fork. Excellent condition £35
NEW Hope QR clamp 31.8mm £12
Specialized 6Al/4V Titanium stem 1 1/8 steerer, 135mm, 5 deg, 25.4 bar £45
X-Lite Alto Pro bar ends (silver anodised) with titanium bolts. Not NOS, but bloody close! £22
X-Lite Stubbie Pro bar ends (black anodised). Not NOS, but bloody close! £25
Specialized Dirt Rodz L-shape bar ends 135g. £15
Middleburn 94mm BCD outer chainrings, some wear but lots of miles left. Black 46T / Silver 44T £5 ea, £8 for both.
BR-M739 tune up kit for squealing M739 V-brakes - the kit is complete, in fact it's got an extra Axle bolt for a total of 3 --- 4 x axle caps --- 2 shims ea of each size 0.05mm, 0.1, 0.2, 0.3. £3.50
XTR M952 SGS rear mech - tatty but working great £20
XT V-brakes M739 - these are the later version with the solid (not cut-out) parellogram arm. 9/10 condition, with washers (but no bolts or noodles unless I can find them in the garage!). £35
Green anodised alloy sealed jockeys with shim spacers, VVGC £15 ... or swap for your red / blue / black / silver / gunmetal / pewter ones! TRADED
Ultimate Hardware 1 1/8" headset cups and sealed cartridge bearings (top and bottom). Takes a normal 45 deg crown race & 1 1/8" top cap. VGC £6
Chris King NoThreadSet Headset 1 1/8" Pewter Grey. Immaculate, taken off a new build bike, never ridden... with new star nut. £75
Neoprene chainstay guard MINT £2
5 x Middleburn gold chainring bolts £7
4 gold anodized alloy bolts M5 x 15mm £3
XTR M952 rear mech with SRP gold alloy pivot bolt and jockey bolts. VGC. £45
Kona Hei Hei 17" titanium frame with Salsa Liplock seat clamp. I measure it to be 17.25" (ctr-to-top) and 22.5" effective top tube. Formerly owned by Cass of this parish... apparently decals are originals and are in good nick apart from a couple of nicks I've touched up. No issues and in very good condition, but unfortunately I have to admit it is too small for me and need to sell to fund a replacement. More pics here: http://www.flickr.com/photos/35229453@N00/sets/72157624436313136/show/
Pace V-Brake adaptors . £25.
Ti v-brake posts £10
Pace RC45 stem £37
Syncros 27.0mm x 330mm Ti seatpost SUPER RARE in this size! £125
NEW tube of Autosol £3.50
NEW KK 32T 94mm BCD chainring - top quality, slightly thicker than normal rings, no ramps...perfect for SS or 1x9 £16
Pace RC31s (earlier version with CNC'd crown). £115
NEW KCNC 11T gold anodised sealed bearing jockeys £24
Mavic Crossmax (original version). Shallow pitting to ceramic braking surfaces (has no effect under braking), some drive-side spokes have marks due to overshifted chain, but have been touched up. Wheels are true within 1mm in all directions, bearings and freehub good. Come with tubes and pair of F & R specific Michelin Wildgripper XL S - tread is very good (still has some moulding flashing on there!), but front has a few sidewall scuffs. Also included XT M750 9 spd 11-32 cassette (good condition, no slipping) and a pair of generic skewers. Will be shipped in a proper wheel box. More pics here: http://www.flickr.com/photos/35229453@N00/sets/72157624498875689/show/ . £200
NOS CNC'd Cannondale Coda Tarantula cranks 2x9 170mm / 94 BCD £45. Good condition matching Octalink 109.5mm BB £13
Ritchey Comp bar full 580mm width 25.4mm diameter, good condition £9
XTR M950 V-brake levers - with used Teflon coated cable. Work perfectly, but have external finish wear. £30
Hope Gunsmoke Grey seatclamp MINT 31.8mm £10
Avid SD5 V-brake - good condition, nearly new pads £8
Cane Creek S2 Sealed Cartridge headset 1 1/8" VGC, but no star nut. £10
Super rare Precision Billet Proshift rear derailleur. Classic retro rear mech... beautiful and almost indestructible. Big pics here: http://www.flickr.com/photos/35229453@N ... 0733/show/ £120
Royce UK titanium BB - English thread 1.37x24, 68mm x 113mm. Threads, tapers, bearings perfect. Bearings recently replaced with red seal (all weather) bearings by Royce. Royce stainless steel axle bolts and lockrings included. £85
FSA Orbit 1" aheadset with good O-ring seals. Regreased with Finish Line ready to fit. Good condition £6

 

[red_riviera]

pics

 

[rojo]

XTR M952 SGS rear mech - tatty but working great £20

pic?

 

[red_riviera]

pics

 

[rojo]

what speed is the xtr?? thicko me sorry

 

[red_riviera]

what speed is the xtr?? thicko me sorry

It's a 9 speed, but should work OK with 8 as well.

 

[rojo]

what speed is the xtr?? thicko me sorry

It's a 9 speed, but should work OK with 8 as well.

am interested if ok on 8 speed

 

[shutterman]

Dibs on BR-M739 tune up kit

pm sent

 

[Agency_Scum]

That rear mech will work absolutely fine on both 7 and 8 speed.