- Feedback
- View
Forks -
GT forks, green are off an outpost or timberline, 1-1/8 threaded 165mm stamped spinner
Purple ones are rattlecanned I think, sure these were off a pantera but cant be 100% 1-1/8" threaded 145mm.
The pair for £10 posted
Saracen super max drive, basically a nice Tange big fork 1-1/4" 140mm threaded, these came off a trekker hydrotech and the paint is rough so Ideally need re-finishing, nice dropouts tho.
£11 Posted
Manitou Mach 5 1" threaded short 130mm steerer, bit dirty and does have paint flaking off here and there... but they seem to be working fine.
£15 posted SOLD
Pace MXCD? correct me if i'm wrong, these need a full overhaul as they move up....and down with a push and pull - plus one of the braces needs replacing as it is literally corroding before my eyes, 1-1/8" 210mm long steerer, must be worth it for the parts....
£25 posted SOLD
Marin alloy forks, off modern muirwoods, with eyelets and lowrider mounts disc or V compatible, steel steerer with approx 260mm and again 1-1/8".
£25 posted
Zoom stem 1" quill, 150mm, useable condition but would benefit from a polish
£8 posted
Zoom stem and bar combo 1-1/8" quill, 560mm uncut bar, quit a light setup
£16 posted
Sakae alloy bar & stem combo, nice wide riser, off a maverick I think, great for an early build
£15 posted
Ritchey comp bars, 560mm, silver
£10 posted
Syncros stem, Cattleprod? twin pinch 1-1/8" 140mm I think, rattlecanned black as the previous owner chopped the noodle off
£20 Posted
DX V- brake, the red ones, one set, no bolts or pads.
£8 posted
Suspension seatpost 25.4mm with some shims to 26.8 then 30mm I think.
£17 posted
XT LH crank 175mm, still has XT pedal fitted as I'm way too lazy to try and get it off, tapers good but threads are ...'vague' untidy.... don't know where this came from TBH. postage...
£2.80 posted
Trek stamped alloy pannier rack, for the trek owner that nearly has everything.
£12 posted
GT forks, green are off an outpost or timberline, 1-1/8 threaded 165mm stamped spinner
Purple ones are rattlecanned I think, sure these were off a pantera but cant be 100% 1-1/8" threaded 145mm.
The pair for £10 posted
Saracen super max drive, basically a nice Tange big fork 1-1/4" 140mm threaded, these came off a trekker hydrotech and the paint is rough so Ideally need re-finishing, nice dropouts tho.
£11 Posted
Manitou Mach 5 1" threaded short 130mm steerer, bit dirty and does have paint flaking off here and there... but they seem to be working fine.
£15 posted SOLD
Pace MXCD? correct me if i'm wrong, these need a full overhaul as they move up....and down with a push and pull - plus one of the braces needs replacing as it is literally corroding before my eyes, 1-1/8" 210mm long steerer, must be worth it for the parts....
£25 posted SOLD
Marin alloy forks, off modern muirwoods, with eyelets and lowrider mounts disc or V compatible, steel steerer with approx 260mm and again 1-1/8".
£25 posted
Zoom stem 1" quill, 150mm, useable condition but would benefit from a polish
£8 posted
Zoom stem and bar combo 1-1/8" quill, 560mm uncut bar, quit a light setup
£16 posted
Sakae alloy bar & stem combo, nice wide riser, off a maverick I think, great for an early build
£15 posted
Ritchey comp bars, 560mm, silver
£10 posted
Syncros stem, Cattleprod? twin pinch 1-1/8" 140mm I think, rattlecanned black as the previous owner chopped the noodle off
£20 Posted
DX V- brake, the red ones, one set, no bolts or pads.
£8 posted
Suspension seatpost 25.4mm with some shims to 26.8 then 30mm I think.
£17 posted
XT LH crank 175mm, still has XT pedal fitted as I'm way too lazy to try and get it off, tapers good but threads are ...'vague' untidy.... don't know where this came from TBH. postage...
£2.80 posted
Trek stamped alloy pannier rack, for the trek owner that nearly has everything.
£12 posted
