Easton, SRAM, Shimano Deore

[davidj]

SRAM X-SYNC 94 BCD 32 Tooth 11 speed thick/thin chain ring, brand new and unused Asking £10ppg delivered

Shimano Deore 160 Centrelock rotor SM RT62, Used. £6.50ppg delivered

Easton Vice stem 100mm for 25.4 bars. Excellent unmarked £18.00ppg - SOLD
Thomson Elite X4 faceplate in black, used but unmarked £12.00ppg - SOLD
Giant 31.8 seat post clamp built in rack mounting points £5ppg - SOLD
Tange 68x118 bottom bracket £6.50ppg - SOLD
RaceFace Ride two bolt 27.2 seat post, 350mm £18.00ppg -SOLD
Outland X-Country 25.4mm riser bars, 650mm wide £9ppg - SOLD
Orange branded chainstay protector, New and unused £8ppg - SOLD
Shimano XTR 180 Centrelock rotor SM-RT97M, £15ppg - SOLD
Shimano Deore FD-M510 front mech, £9.00 - SOLD
Chris King top cap, £5ppg - SOLD
Shimano BB-UN72 68x110, £12.90 - SOLD
Shimano Deore FC-M460 Hollowtech cranks £18.00 - SOLD
Maxxis Ranchero 26 X 2.0 £20.00 - SOLD
Hope skewers in gold £12.90 - SOLD.
Shimano Deore SL-M510 3X9 Shifters £15 - SOLD
Crank Brothers quattro pedals. £23.00ppg - SOLD
Shimano FD-M660 front mech £10ppg - SOLD
Ritchey Comp 26.8 2 bolt seat post. £15ppg - SOLD
FSA Orbit MX headset, £15.00 - SOLD
Avid Juicy 3 disc brakes £16.50 - SOLD
SDG Bel Air saddle, really nice condition £15.00 - SOLD
Avid V brake set including noodles with good pads £12.90 - SOLD
Hope seat post clamp 31.8 £10- SOLD
Shimano Deore XT FD-M771 £17.50 - SOLD
Cheap Saddles: £6ppg each or both for £8.50 - BOTH SOLD
Bontrager stem 90mm £15 - SOLD
Shimano PD M520 SPD's £10 - SOLD
Pro 60mm stem £12 - SOLD
Hope brake boss hose guide and plug set. 8mm thread. Asking £9 - SOLD
Shimano Deore LX V brakes £10 - SOLD
Shimano Deore front mech £8 - SOLD
Shimano 3x8 shifters £10 - SOLD
Shimano Deore Hollowtech cranks £20 + Postage - SOLD
XT Deore RD-M761 rear mech £17 + postage - SOLD
Two Hope Rotors 180mm & 160mm - SOLD
Hope 183mm Post to Post Caliper mount (Type H). asking £9 - SOLD


I would be more than happy to combine postage or consider offers.

 

[davidj]

Re:

More pictures.

 

[davidj]

Re:

More pictures

 

[Mike Muz]

Re:

Oh bugger, spotted too late!

Bought a pair yesterday :facepalm:

 

[davidj]

Re: Hope Caliper mount, Hope brake boss hose guide & plug

Hope hose guide & plug added.

 

[davidj]

Re:

Shimano & Bontrager parts added.

 

[davidj]

Re: Hope, Shimano & Bontrager parts

Pro 60mm stem added

 

[Timoth27]

Re:

Hi, interested in the front mech, looking at the pic what tube size would it be without the shim? Also you said it can be set for top pull just want to check that is the case as that's what I need.

Thanks

Tim

 

[davidj]

Re:

Not sure how to remove the shim to be honest, I am afraid it will break if I try to force it. The "shims" add 2mm to the diameter, each being 1mm thick.

Definitely good for top and bottom pull, you can check out the Shimano pdf for this mech on line which shows top and bottom cable pull.

 

[Timoth27]

Re:

Ok thanks for the response not come across the shims before (been away from the scene for some years) I need 34.9 so no good anyway.

Thanks

Tim