Too much stuff so one BMX has to go it was built as our sons spare bike so its hardly been used.
Its a Custom weights about 23lb possibley less I will weigh it on the bath room scales tomorrow.
Premium Death trap frame 20.5 top tube. With removable brake mounts so you can go brake less and have no sticky out bits on the frame.
Federal Dan lacey bars
Premium wheel set sealed bearings
Fit Bike Co matching tyres
Premium forks
Salt cranks
Salt brake set up from memory
FSA the pig headset
Federal pivotal seat
Integral seat clamp
Fit Bike co. Plastic pedals ( not the old ones in the pic)
ODI stay strong grips and bar ends
Haro stem
The frame alone was £350, and with all the other bits it cost over £800 to build.
£Was £259 now reduced to £150 for a quick sale Ideally collected from near Junction 7 of the M62
Pictures below
http://s1270.beta.photobucket.com/user/ ... 3670305575
Its a Custom weights about 23lb possibley less I will weigh it on the bath room scales tomorrow.
Premium Death trap frame 20.5 top tube. With removable brake mounts so you can go brake less and have no sticky out bits on the frame.
Federal Dan lacey bars
Premium wheel set sealed bearings
Fit Bike Co matching tyres
Premium forks
Salt cranks
Salt brake set up from memory
FSA the pig headset
Federal pivotal seat
Integral seat clamp
Fit Bike co. Plastic pedals ( not the old ones in the pic)
ODI stay strong grips and bar ends
Haro stem
The frame alone was £350, and with all the other bits it cost over £800 to build.
£Was £259 now reduced to £150 for a quick sale Ideally collected from near Junction 7 of the M62
Pictures below
http://s1270.beta.photobucket.com/user/ ... 3670305575
