*SOLD/TRADED*
DX BR-M650 canti brake set - swapped
Full bikes worth. Tatty condition, pads should be replaced. Can be used as is with a bit of tidying, or good for spares.
NOS Race Face Deus XC WHITE threadless stem - $35
1-1/8" 120mm x 15-rise. New in box, beautiful CNC. Painted white finish.
ControlTech V brakes - $120
Lovely red anodized. Complete full bikes worth. Lightweight at only 94g/pair without pads/hardware!!! 149g/pair with pads as shown. Original grey pads are included although they still have life in them, are fairly tatty and discoloured. Some wear/rub to the inner side of one arm and the hinge area of the cable stop of the other. When mounted they are not that noticeable.
DX ST-M071 7-speed STI/brake combo - $40 Very good working condition. Hoods included.
XT M095 rear/RH trigger brake lever 7-speed. Decent condition, with some wear to the lever finish. $10
Complete Ritchey Logic WCS canti brakes and lever set - $90
Complete full bikes worth with pads and mounting bolts. Excellent condition. Logos are intact on brake arms, except for slight rub off on the "C" on one arm. Levers are excellent with newly mounted NOS Tioga brake covers. They were put on not to hide any blemishes but just to provide extra grip. The covers can be removed with the lever finish in excellent condition underneath.
Race Face Turbine I-Beam - $130
Black with black spyder. Standard rings and 170mm length. Includes required extra longer granny bolt/spacers. Good to excellent condition. Typical heal rub/wear to the finish along with a few minor heal dings at the arm edges. Nothing major.
NOS XTR M900 front skewer - swapped/traded
New, never used or mounted.
Salsa chainring 110BCD 38T - $20 Light wear, plenty of life
Shimano UN51 68mm x 113mm. $10
Shimano front/LH thumb shifter Light weight with multi-increment ratchet adjustment. FREE + shipping!
Black LX drive side crank arm FC-M560 175mm. Decent condition FREE + shipping!
Titanium chainring bolts - $10
Set of 4 with 12mm bolt length & 4mm of threads
NOS Syncros Cattleprod (threaded) stem - $60
1-1/8" 150mm x 15° rise. Hard to find brand new in bag, sealed and unopened. S of logo decal on one side of stem is crooked.
Syncros Hardcore threadless headset - $60
Black. Excellent condition. Bearings smooth
NOS Syncros chainring 94BCD 48T - $80
Silver finish, brand new in packaging
Avid Ultimate SD canti levers in ano RED - $90
Super nice red. A few minor scratches to finish at end of levers. Non-original clamp bolts, can be replaced in a pinch if wanted. Slight crimp in the underside of the body near cable insertion hole, but not visible when mounted and doesn't effect function.
Syncros Cattlehead stem - TRADED
Black 1-1/8" 130mm 0° rise. Good condition. Good condition with light scratches at top, scratch at left handlebar clamp. Some peculiar bubbling caused by what looks to be a scrap at the bottom, but not really noticeable when installed. All three logos relatively intact. Includes stem cap and clamp bolt.
Real Design X-levers in Black - $50
Good to excellent condition. A few scuffs, but no major scraps. Cable slots for both canti and V.
Syncros Revolution compact spyder - $35
Spare Black compact spyder in excellent condition.
CBR E cranks: w/ standard RF outer/middle ring, and compact Sugino inner - $100, w/o rings - $70
Some wear to the black finish. Seems some chemical stripped part of the finish at the base of the non-drive side arm. Complete with proper fixings/spacers.
NOS Race Face Taperlock BBs 110mm & 107mm - $70
New in box with instruction sheet. Compatible with 68/73mm BB shell and cups allow for adjustable chain line.
Race Face Next Forged cranks - $120
Black. Some fairly light scratches but that's it. Overall the finish on these is still excellent. Only some minor decal wear on on drive side arm. Tapers and threads excellent! Can offer RF chainrings and BB if wanted by buyer for additional.
NOS Specialized Umma Gumma tyre - $85
More Extreme S 2.5
Real Design canti/v brake levers (red)- $55
Nice condition. Few scratches but nothing major. Cable adjusters faded. One of the clamp bolts is missing.
Syncros Cattlehead stem - $40
Black, 1-1/8" 120mm 0° rise. Excellent condition. Includes stem cap and clamp bolt
Control Tech threadless stem (black) 1-1/8" 150mm 0° rise. Very good condition, with CT logos on both sides, with one slightly tatty, and "Made in USA" decal underneath $15
Control Tech seatpost - $50
Silver 31.6mm diameter 350mm length. Good condition, "Made in USA" decal still in place.
XT M739 v-brakes - $55
Excellent working condition. Logos are intact. Includes original fixing bolts as well as a full new set of XT M750 cartridge holder/pads but no noodles.
Avid Speed Dial levers - $15, add to XT Vs above for $10
Rough polish on these, could do with a little more elbow grease to make them smooth and shiny if need be. Sprayed some grippy red "rubberized" coating on the levers, which has some wear through near the tips.
Onza H.O. SPDs w/ Ti spindles Includes original box with $299 pricetag! Also includes cleats/hardware and 4 sets of elastomers: blue (installed), clear, grey, black. Left foot pedal has some tool marks on the spindle from installing/removing. Someone also etched "L" & "R" on corresponding pedals. Could do with a good clean. $40
Tioga Alchemy stem - $15 1-1/8" threadless. Excellent condition with a gloss black finish. Forgot to measure length, approx 130mm I would say, but will provide later. Bit of rise.
Syncros Cattlehead hinged 1-1/8" x 130mm x 0, silver & black avail. - $30 each
Identical stems, one black with relatively intact logos, silver no logos. Includes clamp bolt but no stem cap.
Easton EA50 flatbar Uncut 580mm length. In MINT, like new condition $25
Avid FR5 V-brake levers Mint, like new condition $20
Race Face XY seatpost - $55 Silver 31.6mm diameter 330mm length. Excellent, almost new condition with very little sign of use. Was NOS, installed and used lightly for a few rides.
Paul Components V-brake levers Very nice condition in silver $70
Race Face Turbine LP black ano 94/58BCD 175mm - $120
Super nice condition. I few minor scraps, particularly on the pedal edge of drive side arm, but nothing major.
NOS Race Face Taperlock BBs 107mm - $75
New in box with instruction sheet. Compatible with 68/73mm BB shell and cups allow for adjustable chain line.
NOS Race Face Turbine DH black powdercoated 110/74BCD 175mm - $130
A bit of shop wear but not been used. Does not include the ring attached in the picture.
XTR M900 STI shifter/levers - $60
A bit tatty in a few areas, such as the top of clamps and the rubber on the shifters. Otherwise the rest is in very good condition and works flawlessly
Race Face EX 4130 steel threadless stem (black) 1-1/8", 140mm, approx. 3° rise. Standard 25.4mm bar clamp. Will only fit steel steerer, will NOT fit alum steerer. Near mint condition with some shop wear $50
XT PD-M735 flat pedals Excellent condition, very little usage/wear. Some minor scratches here and there but nothing major. Overall very clean. $55
XT PD-M735 flat pedals Much more worn than above pair, but still in very good condition $35
Titec/Bontrager Ti handlebar - $35
Just shy of 20"/510cm in length. Logos faded but still somewhat visible
Shimano PD-M323 dual flat/spd pedals Original version with black cage. Good working condition. A set of new Shimano SH-56 cleats will be included $30
XTR M900 F mech 31.8mm top pull. VGC but could do with a clean $35
Suntour XC Pro w/ Grease Guard Very good condition, with some usage/wear. Some minor scratches here and there but nothing major. And YES, BOTH GG port plugs are there! $80
NEW Thomson Elite black seatpost w/ bag 30.9mm x 410mm - $75
Dean Titanium seatpost - $90 26.8mm x 380mm. Neat hinged clamping system without entirely removing either bolts. Fairly clean, with a few minor scuffs here and there that could be buffed out. Very small remnants of the original decals present.
Syncros seatpost 27.2mm x 300mm (cut clean). Excellent condition with a few light scratches. Logos are intact with little wear $35
Syncros chainring gold 110BCD 46T - $40 Used but in excellent condition. Plenty of life in the ring.
XTR M900 crank arms 175mm. Good condition. Logos are gone. Could do well with a nice polish $45
Race Face Turbine LP 175mm x 94BCD. Red powercoat is worn. Structurally in good condition. $50
Race Face Deus threadless stem (black) 1-1/8", 120mm, 5° rise. Standard 25.4mm bar clamp. Nice CNC'd first generation. Excellent near mint condition $30
Shimano UN72 bottom bracket 68mm x 115mm. Was NOS fitted by prev owner but not used. Bought under the assumption it was a longer axle $15
Girvin Flexstem 1-1/8" 130mm. Was NOS, installed and used lightly for short period of time. Green "soft" elastomer $25
Rocky Mountain threadless stem Silver, 1-1/8th 25.4" x 120mm Karma!
XTR UN90 BB 113mm axle, 73mm shell. Excellent condition. Spins super smooth and cups and tapers are perfect. Original part off a bike that has seen very little use. $35
XT M736 F mech 28.6mm top pull. Good condition $20
Machine Tech canti brake Red with red Ritchey pads. Overall good condition with scratches here and there. Could do with a good cleaning $50
Ritchey steel quill stem for 1-1/8" headset, with cable hanger, 145mm x approx 5-10° rise? Decent condition, some surface rust but no major rusting. Structurally sound, with decals fairly intact, slight scuff on the one side as pictured. $10
Answer Hyperlite black, 560mm/22" in length. Slight scratches and wear to black anodizing that would be covered by grips & shifter/levers. otherwise no structural damage with centre logos intact. $35
Titanium quill stem for 1" headset, 135mm x approx 10° rise? Reportedly came off a Marin. Excellent condition, nice and light weight $50
Thomson Elite seatpost Silver, 27.0mm x 410mm. Good condition and includes bag. Logo no longer visible, some insertion marks as well as some marks from collar. Also a spare black replacement clamp $50 for seatpost, $15 for clamp, $60 for everything
Easton carbon water bottle cage Excellent condition. Some light scuffs inside the cage from bottle insertion/removal. Otherwise no other marks or damage. $30
XT M737 canti full brake set Owned from new. Excellent condition. Includes original brake pad/holder and straddle $50
XTR M900 STI brake levers w/ shift pods cut off Really good condition. Shame the pods are cut. Would be a nice project to grind/sand down the slight tabs left over and get some colour matched paint to cover it. $25
1" quill to 1-1/8" ahead adapter Black in colour and in excellent condition with very little signs of use. $10
1" Tioga quill stem 135mm w/ rise. Nice satin titanium-like finish. Excellent condition, but missing top plug for quill bolt hole. Also the hole for is slightly off centre. $20
Brodie magnesium brake boosters Set of 4 all in good condition. 3 have all mounting hardware. 4th is missing bolts/washers, but have the required spacer. $15 each, $10 for the one missing bolts/washers
Tektro brake levers NEW $12
LX 1-1/8" threaded headset Good smooth condition, but could do with a cleaning $10
XT M735 R mech Excellent working condition $30
XTR M900 F mech 28.6mm top pull. Excellent condition $30
Shimano M525 SPD pedals Used but in good condition $25
Salsa Shaft seatpost (silver) NOS 27.2mm diameter x 360-380mm (bottom of post is angle cut). In silver which is discontinued from Salsa swapped
XT 1" threaded headset Excellent condition swapped
Original Kona Race Light foam grips Excellent condition, very little use if any. Superlight in weight swapped
Control Tech threadless stem (red) Excellent "like-new" condition, with CT Logo on both sides and "Made in USA" decals swapped
Control Tech seatpost 27.2mm diameter 220mm length. Good condition, "Made in USA" decal still in place $25
Chris King 1" black headset Excellent working condition, slight scuff to lower cup which can be faced towards frame and be unseen $70
XT RD-M735 rear mech Missing cable bolt, scratches on cage body and could do with a better cleaning. I did a quick cleaning and tested pulleys and springs and looks to be in good working order $30
XT SL-M732 Thumbies. Excellent conditions, with a little cleaning would look close to new. Small dimple in the top plastic on left shifter top left of "O" in SHIMANO, but so minor I couldn't really capture the detail in pics. $50
Ritchey Megabite 2.1 Tyres. Pair of skinwalls, non-folding wire beads. Treads are good, one more so than the other with visible wear down the middle of tread. Seems like light brake rub on the one with better tread. But seems superficial, doesn't seem to have worn through wall too much, if at all. Maybe it's just a marking and can be removed. Both tires could use a good cleaning. Not sure what they're worth so I'll ask $25
XT FD-M735 front mech Bottom pull. I believe it's 28.6mm clamp, fully closed I.D. measures approx 27mm. Good working condition. $15
XT BR-M732 Canti in silver. Only one set. No hanger/straddle cable. $15
NOS 1" Control Tech ahead stem in silver. $25
*KARMA'D AWAY*
Onza Bar-ends SKI style in black with lots of scuff & scraps but nothing broken. Good sand and polish project. Free + shipping
XT FC-M735 crank arms Looks usable, but in rough condition. Looks to have been shaved on the driver side arm near pedal mount. Dents on non-driver side arm near BB mount FREE + shipping!
Shimano UN72-E bottom bracket 68mm x 110mm. For use with E-type mounted front derailleur. Axle spins smooth, tapers in excellent condition Karma'd plus shipping
DX BR-M650 canti brake set - swapped
Full bikes worth. Tatty condition, pads should be replaced. Can be used as is with a bit of tidying, or good for spares.
NOS Race Face Deus XC WHITE threadless stem - $35
1-1/8" 120mm x 15-rise. New in box, beautiful CNC. Painted white finish.
ControlTech V brakes - $120
Lovely red anodized. Complete full bikes worth. Lightweight at only 94g/pair without pads/hardware!!! 149g/pair with pads as shown. Original grey pads are included although they still have life in them, are fairly tatty and discoloured. Some wear/rub to the inner side of one arm and the hinge area of the cable stop of the other. When mounted they are not that noticeable.
DX ST-M071 7-speed STI/brake combo - $40 Very good working condition. Hoods included.
XT M095 rear/RH trigger brake lever 7-speed. Decent condition, with some wear to the lever finish. $10
Complete Ritchey Logic WCS canti brakes and lever set - $90
Complete full bikes worth with pads and mounting bolts. Excellent condition. Logos are intact on brake arms, except for slight rub off on the "C" on one arm. Levers are excellent with newly mounted NOS Tioga brake covers. They were put on not to hide any blemishes but just to provide extra grip. The covers can be removed with the lever finish in excellent condition underneath.
Race Face Turbine I-Beam - $130
Black with black spyder. Standard rings and 170mm length. Includes required extra longer granny bolt/spacers. Good to excellent condition. Typical heal rub/wear to the finish along with a few minor heal dings at the arm edges. Nothing major.
NOS XTR M900 front skewer - swapped/traded
New, never used or mounted.
Salsa chainring 110BCD 38T - $20 Light wear, plenty of life
Shimano UN51 68mm x 113mm. $10
Shimano front/LH thumb shifter Light weight with multi-increment ratchet adjustment. FREE + shipping!
Black LX drive side crank arm FC-M560 175mm. Decent condition FREE + shipping!
Titanium chainring bolts - $10
Set of 4 with 12mm bolt length & 4mm of threads
NOS Syncros Cattleprod (threaded) stem - $60
1-1/8" 150mm x 15° rise. Hard to find brand new in bag, sealed and unopened. S of logo decal on one side of stem is crooked.
Syncros Hardcore threadless headset - $60
Black. Excellent condition. Bearings smooth
NOS Syncros chainring 94BCD 48T - $80
Silver finish, brand new in packaging
Avid Ultimate SD canti levers in ano RED - $90
Super nice red. A few minor scratches to finish at end of levers. Non-original clamp bolts, can be replaced in a pinch if wanted. Slight crimp in the underside of the body near cable insertion hole, but not visible when mounted and doesn't effect function.
Syncros Cattlehead stem - TRADED
Black 1-1/8" 130mm 0° rise. Good condition. Good condition with light scratches at top, scratch at left handlebar clamp. Some peculiar bubbling caused by what looks to be a scrap at the bottom, but not really noticeable when installed. All three logos relatively intact. Includes stem cap and clamp bolt.
Real Design X-levers in Black - $50
Good to excellent condition. A few scuffs, but no major scraps. Cable slots for both canti and V.
Syncros Revolution compact spyder - $35
Spare Black compact spyder in excellent condition.
CBR E cranks: w/ standard RF outer/middle ring, and compact Sugino inner - $100, w/o rings - $70
Some wear to the black finish. Seems some chemical stripped part of the finish at the base of the non-drive side arm. Complete with proper fixings/spacers.
NOS Race Face Taperlock BBs 110mm & 107mm - $70
New in box with instruction sheet. Compatible with 68/73mm BB shell and cups allow for adjustable chain line.
Race Face Next Forged cranks - $120
Black. Some fairly light scratches but that's it. Overall the finish on these is still excellent. Only some minor decal wear on on drive side arm. Tapers and threads excellent! Can offer RF chainrings and BB if wanted by buyer for additional.
NOS Specialized Umma Gumma tyre - $85
More Extreme S 2.5
Real Design canti/v brake levers (red)- $55
Nice condition. Few scratches but nothing major. Cable adjusters faded. One of the clamp bolts is missing.
Syncros Cattlehead stem - $40
Black, 1-1/8" 120mm 0° rise. Excellent condition. Includes stem cap and clamp bolt
Control Tech threadless stem (black) 1-1/8" 150mm 0° rise. Very good condition, with CT logos on both sides, with one slightly tatty, and "Made in USA" decal underneath $15
Control Tech seatpost - $50
Silver 31.6mm diameter 350mm length. Good condition, "Made in USA" decal still in place.
XT M739 v-brakes - $55
Excellent working condition. Logos are intact. Includes original fixing bolts as well as a full new set of XT M750 cartridge holder/pads but no noodles.
Avid Speed Dial levers - $15, add to XT Vs above for $10
Rough polish on these, could do with a little more elbow grease to make them smooth and shiny if need be. Sprayed some grippy red "rubberized" coating on the levers, which has some wear through near the tips.
Onza H.O. SPDs w/ Ti spindles Includes original box with $299 pricetag! Also includes cleats/hardware and 4 sets of elastomers: blue (installed), clear, grey, black. Left foot pedal has some tool marks on the spindle from installing/removing. Someone also etched "L" & "R" on corresponding pedals. Could do with a good clean. $40
Tioga Alchemy stem - $15 1-1/8" threadless. Excellent condition with a gloss black finish. Forgot to measure length, approx 130mm I would say, but will provide later. Bit of rise.
Syncros Cattlehead hinged 1-1/8" x 130mm x 0, silver & black avail. - $30 each
Identical stems, one black with relatively intact logos, silver no logos. Includes clamp bolt but no stem cap.
Easton EA50 flatbar Uncut 580mm length. In MINT, like new condition $25
Avid FR5 V-brake levers Mint, like new condition $20
Race Face XY seatpost - $55 Silver 31.6mm diameter 330mm length. Excellent, almost new condition with very little sign of use. Was NOS, installed and used lightly for a few rides.
Paul Components V-brake levers Very nice condition in silver $70
Race Face Turbine LP black ano 94/58BCD 175mm - $120
Super nice condition. I few minor scraps, particularly on the pedal edge of drive side arm, but nothing major.
NOS Race Face Taperlock BBs 107mm - $75
New in box with instruction sheet. Compatible with 68/73mm BB shell and cups allow for adjustable chain line.
NOS Race Face Turbine DH black powdercoated 110/74BCD 175mm - $130
A bit of shop wear but not been used. Does not include the ring attached in the picture.
XTR M900 STI shifter/levers - $60
A bit tatty in a few areas, such as the top of clamps and the rubber on the shifters. Otherwise the rest is in very good condition and works flawlessly
Race Face EX 4130 steel threadless stem (black) 1-1/8", 140mm, approx. 3° rise. Standard 25.4mm bar clamp. Will only fit steel steerer, will NOT fit alum steerer. Near mint condition with some shop wear $50
XT PD-M735 flat pedals Excellent condition, very little usage/wear. Some minor scratches here and there but nothing major. Overall very clean. $55
XT PD-M735 flat pedals Much more worn than above pair, but still in very good condition $35
Titec/Bontrager Ti handlebar - $35
Just shy of 20"/510cm in length. Logos faded but still somewhat visible
Shimano PD-M323 dual flat/spd pedals Original version with black cage. Good working condition. A set of new Shimano SH-56 cleats will be included $30
XTR M900 F mech 31.8mm top pull. VGC but could do with a clean $35
Suntour XC Pro w/ Grease Guard Very good condition, with some usage/wear. Some minor scratches here and there but nothing major. And YES, BOTH GG port plugs are there! $80
NEW Thomson Elite black seatpost w/ bag 30.9mm x 410mm - $75
Dean Titanium seatpost - $90 26.8mm x 380mm. Neat hinged clamping system without entirely removing either bolts. Fairly clean, with a few minor scuffs here and there that could be buffed out. Very small remnants of the original decals present.
Syncros seatpost 27.2mm x 300mm (cut clean). Excellent condition with a few light scratches. Logos are intact with little wear $35
Syncros chainring gold 110BCD 46T - $40 Used but in excellent condition. Plenty of life in the ring.
XTR M900 crank arms 175mm. Good condition. Logos are gone. Could do well with a nice polish $45
Race Face Turbine LP 175mm x 94BCD. Red powercoat is worn. Structurally in good condition. $50
Race Face Deus threadless stem (black) 1-1/8", 120mm, 5° rise. Standard 25.4mm bar clamp. Nice CNC'd first generation. Excellent near mint condition $30
Shimano UN72 bottom bracket 68mm x 115mm. Was NOS fitted by prev owner but not used. Bought under the assumption it was a longer axle $15
Girvin Flexstem 1-1/8" 130mm. Was NOS, installed and used lightly for short period of time. Green "soft" elastomer $25
Rocky Mountain threadless stem Silver, 1-1/8th 25.4" x 120mm Karma!
XTR UN90 BB 113mm axle, 73mm shell. Excellent condition. Spins super smooth and cups and tapers are perfect. Original part off a bike that has seen very little use. $35
XT M736 F mech 28.6mm top pull. Good condition $20
Machine Tech canti brake Red with red Ritchey pads. Overall good condition with scratches here and there. Could do with a good cleaning $50
Ritchey steel quill stem for 1-1/8" headset, with cable hanger, 145mm x approx 5-10° rise? Decent condition, some surface rust but no major rusting. Structurally sound, with decals fairly intact, slight scuff on the one side as pictured. $10
Answer Hyperlite black, 560mm/22" in length. Slight scratches and wear to black anodizing that would be covered by grips & shifter/levers. otherwise no structural damage with centre logos intact. $35
Titanium quill stem for 1" headset, 135mm x approx 10° rise? Reportedly came off a Marin. Excellent condition, nice and light weight $50
Thomson Elite seatpost Silver, 27.0mm x 410mm. Good condition and includes bag. Logo no longer visible, some insertion marks as well as some marks from collar. Also a spare black replacement clamp $50 for seatpost, $15 for clamp, $60 for everything
Easton carbon water bottle cage Excellent condition. Some light scuffs inside the cage from bottle insertion/removal. Otherwise no other marks or damage. $30
XT M737 canti full brake set Owned from new. Excellent condition. Includes original brake pad/holder and straddle $50
XTR M900 STI brake levers w/ shift pods cut off Really good condition. Shame the pods are cut. Would be a nice project to grind/sand down the slight tabs left over and get some colour matched paint to cover it. $25
1" quill to 1-1/8" ahead adapter Black in colour and in excellent condition with very little signs of use. $10
1" Tioga quill stem 135mm w/ rise. Nice satin titanium-like finish. Excellent condition, but missing top plug for quill bolt hole. Also the hole for is slightly off centre. $20
Brodie magnesium brake boosters Set of 4 all in good condition. 3 have all mounting hardware. 4th is missing bolts/washers, but have the required spacer. $15 each, $10 for the one missing bolts/washers
Tektro brake levers NEW $12
LX 1-1/8" threaded headset Good smooth condition, but could do with a cleaning $10
XT M735 R mech Excellent working condition $30
XTR M900 F mech 28.6mm top pull. Excellent condition $30
Shimano M525 SPD pedals Used but in good condition $25
Salsa Shaft seatpost (silver) NOS 27.2mm diameter x 360-380mm (bottom of post is angle cut). In silver which is discontinued from Salsa swapped
XT 1" threaded headset Excellent condition swapped
Original Kona Race Light foam grips Excellent condition, very little use if any. Superlight in weight swapped
Control Tech threadless stem (red) Excellent "like-new" condition, with CT Logo on both sides and "Made in USA" decals swapped
Control Tech seatpost 27.2mm diameter 220mm length. Good condition, "Made in USA" decal still in place $25
Chris King 1" black headset Excellent working condition, slight scuff to lower cup which can be faced towards frame and be unseen $70
XT RD-M735 rear mech Missing cable bolt, scratches on cage body and could do with a better cleaning. I did a quick cleaning and tested pulleys and springs and looks to be in good working order $30
XT SL-M732 Thumbies. Excellent conditions, with a little cleaning would look close to new. Small dimple in the top plastic on left shifter top left of "O" in SHIMANO, but so minor I couldn't really capture the detail in pics. $50
Ritchey Megabite 2.1 Tyres. Pair of skinwalls, non-folding wire beads. Treads are good, one more so than the other with visible wear down the middle of tread. Seems like light brake rub on the one with better tread. But seems superficial, doesn't seem to have worn through wall too much, if at all. Maybe it's just a marking and can be removed. Both tires could use a good cleaning. Not sure what they're worth so I'll ask $25
XT FD-M735 front mech Bottom pull. I believe it's 28.6mm clamp, fully closed I.D. measures approx 27mm. Good working condition. $15
XT BR-M732 Canti in silver. Only one set. No hanger/straddle cable. $15
NOS 1" Control Tech ahead stem in silver. $25
*KARMA'D AWAY*
Onza Bar-ends SKI style in black with lots of scuff & scraps but nothing broken. Good sand and polish project. Free + shipping
XT FC-M735 crank arms Looks usable, but in rough condition. Looks to have been shaved on the driver side arm near pedal mount. Dents on non-driver side arm near BB mount FREE + shipping!
Shimano UN72-E bottom bracket 68mm x 110mm. For use with E-type mounted front derailleur. Axle spins smooth, tapers in excellent condition Karma'd plus shipping
