Anyone used the new XT 1x11?
- Thread starter hopper22
- Start date
Road bikes are getting as little as 1000-2000 miles or so from 11 speed chains, if forum chatter elsewhere is right.
I'd shudder to imagine how pitifully short 11 speed would be off-road, bearing in mind that I could trash a 7 or 8 speed in 500 miles of mud in the winter.. :shock:
I'd shudder to imagine how pitifully short 11 speed would be off-road, bearing in mind that I could trash a 7 or 8 speed in 500 miles of mud in the winter.. :shock:
Re:
I have it
Only done 70 odd km but so far so good. The I spec mount is very neat and the shift is very nice and short, positive too. The brakes are an aesthetic improvement imo over the excellent previous model but feel and stopping power remain the same. The cranks are nicely made and a bargain and the rear mech is also very nice. The only deviation from full M8000 is a One Up Traction chainring which is a 32t oval ring, at the time there was a problem getting the XT rings and I had wanted to try an oval ring, since then I've saw the proper XT rings and they are lovely.
Previous to this I was using 1X10 XT and I think that there is a significant improvement in finish and function and this one goes up to 11, what more could you want.
Fitted HERE
I have it
Only done 70 odd km but so far so good. The I spec mount is very neat and the shift is very nice and short, positive too. The brakes are an aesthetic improvement imo over the excellent previous model but feel and stopping power remain the same. The cranks are nicely made and a bargain and the rear mech is also very nice. The only deviation from full M8000 is a One Up Traction chainring which is a 32t oval ring, at the time there was a problem getting the XT rings and I had wanted to try an oval ring, since then I've saw the proper XT rings and they are lovely. Previous to this I was using 1X10 XT and I think that there is a significant improvement in finish and function and this one goes up to 11, what more could you want.
Fitted HERE
- Feedback
- View
I think 11 at the back, triple then a Sachs duo drive
Er, 3x11x8?
Er, 3x11x8?
teethgrinder
Retro Guru
- Feedback
- View
I have it. Started by trying the M8000 GS mech on my 1x10 - worked even better than the Zee FR mech when paired with the 11-40 at the back. Then got the bar mount shifter as I'm running Hope Tech levers and the 11-42 cassette. Shifts far better than the old M770-17 XT shifter.
I am still running the 10 speed chain on this set up - HG54. £12 from Halfords rather than the £25-odd for an 11 speed one, and still shifts perfectly. Come new chain time, it'll be another HG54.
I am still running the 10 speed chain on this set up - HG54. £12 from Halfords rather than the £25-odd for an 11 speed one, and still shifts perfectly. Come new chain time, it'll be another HG54.
ultrazenith
Senior Retro Guru
- Feedback
- View
Is M8000 any cheaper, what with not having the extra mech and shifter?
