Alpinestars Almega XTR (1992)

[Ganimed]

Thank you in advance

I have used the aluminium version using a 'stoker stem' shim, that is normally used for a seatpost stem on a tandem, at the steerer end, and a seatpost shim i sawed in two, at the bar end, for a 25.4mm road bar. Works a treat.

The weight of the stem is 236grams on my scale.

But the clampsize is to large to fit 1 1/8 fork shafts. You need a shim for that also if you wanna put it onto an 1 1/8 inch shaft.


Regards
Olli

 

[Frankenorange]

The weight of the stem is 236grams on my scale.

But the clampsize is to large to fit 1 1/8 fork shafts. You need a shim for that also if you wanna put it onto an 1 1/8 inch shaft.

View attachment 624627
Regards
Olli

Thank you for that weight Oli. Much appreciated.

 

[Critter65]

Would anyone have a spec shot or something on the fork? Specifically … Offset ? Fork blade diameter ? Thanks in advance. I might have a fork made for my Ti Mega as It’s impossible to find orig Ti Blades