stevec1975
Gold Trader
- Feedback
- View
Loving this, hats off to your lightweight period correctness. This is gonna be a beaut!
93 OCLV weightweenie Project *Latest weigh-in pg. 22*
- Thread starter My_Teenage_Self
- Start date
- Feedback
- View
Again, thanks for the support fellas!
Spokes - The build is based around 93-95, so if wheelsmith were making a 2-1.5, then that's cool. Looking back (at a post started by fluffychicken) it appears that wheelsmith can only be gotten in the states? So, as a bit of a compromise, I'll probably go for the DT revs. Not perfect, but a fair representation?
Alloy Nips too :shock:
Just seen my bank balance, so it may be a month before I can get the wheels done, but I've got a frame to strip and paint in the meantime! (Gil M has been briefed - didn't have these on file)
Thecannibal; (missed your comment, sorry) I agree that Controltech skewers look neat, but it boils down to this: I WILL lose the allen key, and these skewers will end up with the levers screwed in all the time.
That, and I'd also end up scratching everything up trying to get the allen key in whilst covered in mud etc!...
...not to mention that i had these sat around, but had forgotten about them!
Spokes - The build is based around 93-95, so if wheelsmith were making a 2-1.5, then that's cool. Looking back (at a post started by fluffychicken) it appears that wheelsmith can only be gotten in the states? So, as a bit of a compromise, I'll probably go for the DT revs. Not perfect, but a fair representation?
Alloy Nips too :shock:
Just seen my bank balance, so it may be a month before I can get the wheels done, but I've got a frame to strip and paint in the meantime! (Gil M has been briefed - didn't have these on file)
Thecannibal; (missed your comment, sorry) I agree that Controltech skewers look neat, but it boils down to this: I WILL lose the allen key, and these skewers will end up with the levers screwed in all the time.
That, and I'd also end up scratching everything up trying to get the allen key in whilst covered in mud etc!...
...not to mention that i had these sat around, but had forgotten about them!
- Feedback
- View
I'm surprised at those spoke weights, when I was looking recently I remember being surprised how little difference there was :? Big fan of Revs though and I'm sure I had some in about '93/4 - Hope UltraLight on Mavic 230, about 630g iirc 
Rear was LX but still respectable - transformed the bike!
Tyre wise it was an IRC V-Claw Lite on the back @470g (if anyone has one of these please...) but something big & grippy up front, like a Maxxis Mofo DH 2.35 - still not overly weighty.
Keep up the good work!
Rear was LX but still respectable - transformed the bike!Tyre wise it was an IRC V-Claw Lite on the back @470g (if anyone has one of these please...) but something big & grippy up front, like a Maxxis Mofo DH 2.35 - still not overly weighty.
Keep up the good work!
shaun
Retrobike Rider
elPedro666":2yrareh2 said:I'm surprised at those spoke weights, when I was looking recently I remember being surprised how little difference there was :? Big fan of Revs though and I'm sure I had some in about '93/4 - Hope UltraLight on Mavic 230, about 630g iirc
Tyre wise it was an IRC V-Claw Lite on the back @470g (if anyone has one of these please...) but something big & grippy up front, like a Maxxis Mofo DH 2.35 - still not overly weighty.
Keep up the good work!
Hi El Pedro, the spoke weights quoted are as listed on DTs own website and I am amazed at the revolving weight that can be saved, so I hope they have got it right
. I have two sets of wheels for my Litespeed weight weenie project bike and the mavic 230s with revs transform the ride completely and also reduce the all important weight also! I fully understand that other lightweight parts are also important, but in my 20 years of bike building the wheels are only second to a quality frame for a superbike build.
- Feedback
- View
Couldn't agree more on the effect of light, well-built wheels, best money you can spend on a bike (after the tyres)
How's the build coming together - I think we need some more progress pics...
How's the build coming together - I think we need some more progress pics...
- Feedback
- View
Rims should be arriving this week, but cash flow means a pause in proceedings for a bit.
I've started the (very tedious) process of stripping paint from carbon without touching the carbon. It's not quick or pretty, but should be worth it in the end!
Nothing else to report for now I'm afraid.
Except, my sums say this should be a sub 21lb build...
I've started the (very tedious) process of stripping paint from carbon without touching the carbon. It's not quick or pretty, but should be worth it in the end!
Nothing else to report for now I'm afraid.
Except, my sums say this should be a sub 21lb build...
- Feedback
- View
My_Teenage_Self":d1htekj8 said:Rims should be arriving this week, but cash flow means a pause in proceedings for a bit.
I've started the (very tedious) process of stripping paint from carbon without touching the carbon. It's not quick or pretty, but should be worth it in the end!
Nothing else to report for now I'm afraid.
Except, my sums say this should be a sub 21lb build...
ooo, so close! Starts getting very expensive as you get close to the magic '20' though...
Good luck with the sanding, try to keep hold of your sanity (and don't breathe it in!)
- Feedback
- View
I've a paint stripped that's safe for carbon, it's slow, and a bit weak, but it does work - I'm very wary of sanding it, and I just want to get back to a good base, not bare carbon.
Hehe, the 'magic' 20... I don't know if I'll see it, but it's worth a shot!
Hehe, the 'magic' 20... I don't know if I'll see it, but it's worth a shot!
- Feedback
- View
LOL! deffo sub 10kg!
Similar threads
