- Feedback
- View
Bear with me, it's not often I stray this far south on the board and my knowledge of road-based stuff is limited at best.
Campagnolo Athena(?) hubs laced to Campagnolo Omega Strada Hardox rims. Both wheels are true, bearings spin well, but one (I can check which) feels like it needs regreasing. The rims are in good condition and come complete with a Sachs 8-speed freewheel, Michelin Sport Select tyres and innertubes. Also included are the original Campagnolo skewers, the front in good condition, but the rear a bit on thew rusty side.
Was £120 then £110 now £95 posted
88 Campagnolo Athena chainset / crankset with original 42T and 52T chainrings and 170mm arms. In decent condition (see photos) the tapers and threads are great and the teeth on the chain rings don't look that worn (see photos). Included are the original crank bolts and good condition plastic dust caps.
£44 posted
EDIT - put on hold after it was pointed out these are shortened to 140mm
88 Campagnolo Athena front and rear brake calipers. The bodies are in great condition, the steel parts have rust pitting (which I have made no attempt to clean up) as shown in the photos. Included are the original Campagnolo holders and pads.
Was £54 then £48 now £39 posted
90s Campagnolo Athena Rear derailleur. Good condition.
Was £32 then £27 now £24 posted
Campagnolo Athena Shifting brake levers/brifters. Mechanically very good but the hoods are very tatty.
Was £33 now £28 posted SOLD
Campagnolo Athena front derailleur/mech. Good condition, minimal scratching to the cage 28.6mm clamp on.
£15 posted SOLD
Campagnolo Athena? Seat post/seatpost. 27.2mm x 200mm. Internally fluted. Plenty of small scratches from insertion, as shown on pictures.
Was £38 now £32 posted SOLD with frame
1990 Raleigh Dyna-tech Pro frameset. Sold as frameset only (see catalogue http://www.retrobike.co.uk/gallery2/d/5 ... s_1990.pdf) this is made of Renolds 2080 (equivalent to 753?) and is a '56' which measures 55cm c-c for both seat tube and top tube. Frame come complete with very nice original Dyna-tech pro fork, with Raleigh stamped drop-outs. It is in good condition with zero dents and good paint on the seat tube and down tube. There are some rust spots however on the underside of the top tube and the chain stays, as I have tried to capture in the photos. Comes complete with FAG bottom bracket, which is smooth, but I don't have the tool to remove it.
Was £140 now £120 posted SOLD £125 with seat post
ITM Super Italia Pro-2 handlebars/bars/drops. Good condition, dual grooves, with a few small marks where levers have been mounted. 420mm wide. Feel very light.
Was £24 now £20 posted £22 with stem SOLD
ITM 90 quill stem. Good condition and logo perfect.
Was £12 now £10 posted or £5 with the bars £22 with bars SOLD
Look Arc PP156 pedals. Mechanically excellent, with nice smooth bearings, but paint flaking.
Was £10 now £8 posted or karma with another purchase Now KARMA
Brooks sprung saddle. Complete with clamp. Metal has rust and the leather has cracks, but I imagine someone who knows how to look after them could get it pretty nice.
Was £24 now £20 posted SOLD
Royce 51T 144mm bcd/pcd chain ring/chainring. Teeth in very good condition, very slight corrosion in places.
£22 posted SOLD
EDCO? 42T 144mm bcd/pcd chain ring. I can't see a brand mark, but was mounted on an EDCO Competition crank with a Royce outer ring. Light and in good condition.
Was £16 now £14 posted
Motobecane frameset. 55cm c-c seat tube, 57cm c-c top tube. Made with Vitus 888 tubing. Complete with bottom bracket, headset and forks with embossed Motobecane logo. Bought as a single speed project, with the horizontal drop-outs, but too small for me to use myself. Classic paint scheme ok, but with surface rust in places.
£26 posted SOLD
Weimann brake callipers with Motobecane logo.
£7 posted SOLD
Weimann brake levers. Came mounted to flat bars, but designed for drops. In working condition.
£7 posted SOLD
Finally, a few karma speedo parts. They were all still working last time they were tested, but that was years ago. There is a wired Cateye sensor, a wireless Cateye sensor and a Speedmaster RC 8000. They are free to anyone they are of use to, otherwise they will just get binned. I also have more old speedo parts around, so can throw in more if I can dig them out. ALL GONE
Please ask if you want any further details or pictures of items.
If you feel the prices are off, make me an offer. I won't be offended, but anything significantly lower would probably mean it was worth my while trying Ebay.
Discounts on all multiple purchases, if you want more than one item, let me know and we can agree a significantly lower combined price.
Generally, I will look at postage options on a part by part basis, so if you have any postage preferences (e.g. avoiding companies you have had bad experiences with) please let me know when you buy the item and I will ensure they are sent with a carrier you are happy with.
Campagnolo Athena(?) hubs laced to Campagnolo Omega Strada Hardox rims. Both wheels are true, bearings spin well, but one (I can check which) feels like it needs regreasing. The rims are in good condition and come complete with a Sachs 8-speed freewheel, Michelin Sport Select tyres and innertubes. Also included are the original Campagnolo skewers, the front in good condition, but the rear a bit on thew rusty side.
Was £120 then £110 now £95 posted
88 Campagnolo Athena chainset / crankset with original 42T and 52T chainrings and 170mm arms. In decent condition (see photos) the tapers and threads are great and the teeth on the chain rings don't look that worn (see photos). Included are the original crank bolts and good condition plastic dust caps.
£44 posted
EDIT - put on hold after it was pointed out these are shortened to 140mm
88 Campagnolo Athena front and rear brake calipers. The bodies are in great condition, the steel parts have rust pitting (which I have made no attempt to clean up) as shown in the photos. Included are the original Campagnolo holders and pads.
Was £54 then £48 now £39 posted
90s Campagnolo Athena Rear derailleur. Good condition.
Was £32 then £27 now £24 posted
Campagnolo Athena Shifting brake levers/brifters. Mechanically very good but the hoods are very tatty.
Was £33 now £28 posted SOLD
Campagnolo Athena front derailleur/mech. Good condition, minimal scratching to the cage 28.6mm clamp on.
£15 posted SOLD
Campagnolo Athena? Seat post/seatpost. 27.2mm x 200mm. Internally fluted. Plenty of small scratches from insertion, as shown on pictures.
Was £38 now £32 posted SOLD with frame
1990 Raleigh Dyna-tech Pro frameset. Sold as frameset only (see catalogue http://www.retrobike.co.uk/gallery2/d/5 ... s_1990.pdf) this is made of Renolds 2080 (equivalent to 753?) and is a '56' which measures 55cm c-c for both seat tube and top tube. Frame come complete with very nice original Dyna-tech pro fork, with Raleigh stamped drop-outs. It is in good condition with zero dents and good paint on the seat tube and down tube. There are some rust spots however on the underside of the top tube and the chain stays, as I have tried to capture in the photos. Comes complete with FAG bottom bracket, which is smooth, but I don't have the tool to remove it.
Was £140 now £120 posted SOLD £125 with seat post
ITM Super Italia Pro-2 handlebars/bars/drops. Good condition, dual grooves, with a few small marks where levers have been mounted. 420mm wide. Feel very light.
Was £24 now £20 posted £22 with stem SOLD
ITM 90 quill stem. Good condition and logo perfect.
Was £12 now £10 posted or £5 with the bars £22 with bars SOLD
Look Arc PP156 pedals. Mechanically excellent, with nice smooth bearings, but paint flaking.
Was £10 now £8 posted or karma with another purchase Now KARMA
Brooks sprung saddle. Complete with clamp. Metal has rust and the leather has cracks, but I imagine someone who knows how to look after them could get it pretty nice.
Was £24 now £20 posted SOLD
Royce 51T 144mm bcd/pcd chain ring/chainring. Teeth in very good condition, very slight corrosion in places.
£22 posted SOLD
EDCO? 42T 144mm bcd/pcd chain ring. I can't see a brand mark, but was mounted on an EDCO Competition crank with a Royce outer ring. Light and in good condition.
Was £16 now £14 posted
Motobecane frameset. 55cm c-c seat tube, 57cm c-c top tube. Made with Vitus 888 tubing. Complete with bottom bracket, headset and forks with embossed Motobecane logo. Bought as a single speed project, with the horizontal drop-outs, but too small for me to use myself. Classic paint scheme ok, but with surface rust in places.
£26 posted SOLD
Weimann brake callipers with Motobecane logo.
£7 posted SOLD
Weimann brake levers. Came mounted to flat bars, but designed for drops. In working condition.
£7 posted SOLD
Finally, a few karma speedo parts. They were all still working last time they were tested, but that was years ago. There is a wired Cateye sensor, a wireless Cateye sensor and a Speedmaster RC 8000. They are free to anyone they are of use to, otherwise they will just get binned. I also have more old speedo parts around, so can throw in more if I can dig them out. ALL GONE
Please ask if you want any further details or pictures of items.
If you feel the prices are off, make me an offer. I won't be offended, but anything significantly lower would probably mean it was worth my while trying Ebay.
Discounts on all multiple purchases, if you want more than one item, let me know and we can agree a significantly lower combined price.
Generally, I will look at postage options on a part by part basis, so if you have any postage preferences (e.g. avoiding companies you have had bad experiences with) please let me know when you buy the item and I will ensure they are sent with a carrier you are happy with.
