1997 Marin Bear Valley SE (Pic Heavy)

L7NCH

Retro Newbie
Hi everyone,
I'm new here and would like to share my winter project, its a 1997 Marin Bear Valley SE (No suspension).
I've only really been into bikes over the last year or so, mainly road cycling. Although I really like the simplicity of an older bike. I appreciate the Bear Valley SE was at the lower end of the Marin range, therefore do not intend on spending much the refurbish the bike; £50. the bike itself cost me £10. I plan on using the bike for work when finished or selling it.
Here are a few pics of the bike when I picked it up...




I believe all parts apart from the rear tyre are original!! I intend to keep the bike as original as possible.

Here is the catalogue page from the Marin archive:


Regards, Callum
 

Attachments

  • bike 1.jpg
    bike 1.jpg
    346.9 KB · Views: 1,150
  • bike 2.jpg
    bike 2.jpg
    382.1 KB · Views: 1,140
  • bike 3.jpg
    bike 3.jpg
    383.6 KB · Views: 1,139
  • 23 Bear Valley SE.jpg
    23 Bear Valley SE.jpg
    478.6 KB · Views: 1,139
Re: 1997 Marin Bear Valley SE

More pics of the condition when collected...
 

Attachments

  • IMG_20191020_145937low.jpg
    IMG_20191020_145937low.jpg
    41.7 KB · Views: 1,109
  • IMG_20191124_131250low.jpg
    IMG_20191124_131250low.jpg
    56 KB · Views: 1,108
  • IMG_20191124_131259low.jpg
    IMG_20191124_131259low.jpg
    54 KB · Views: 1,109
  • IMG_20191124_131313low.jpg
    IMG_20191124_131313low.jpg
    50 KB · Views: 1,110
  • IMG_20191124_131322low.jpg
    IMG_20191124_131322low.jpg
    49 KB · Views: 1,110
  • IMG_20191124_131327low.jpg
    IMG_20191124_131327low.jpg
    39.6 KB · Views: 1,109
  • IMG_20191124_131335low.jpg
    IMG_20191124_131335low.jpg
    53.5 KB · Views: 1,109
Re: 1997 Marin Bear Valley SE

that's a big project. needs plenty TLC. Will be worth it. The ad looks a first rate mtb
 
Re:

Hopefully all it needs is a good clean and some new cables, solid bikes these Bear Valleys, underrated if you ask me.
 
Re: 1997 Marin Bear Valley SE

The bike was fully stripped down and assessed at weekend, only just took photos today.
- 4x spokes broken on rear wheel drive side
- Rear bearings binding
- Frame in 'ok' condition
- Pads down to the bone
- Tyres cracked
- All cables are shot
- Middle chainring has broken teeth
- Chain had to be cut off
- Seat ripped
- Bottom bracket rusted

Here are pics of the frame n wheels cleaned up..


Quite scratched on top tube.




Will be fully polished before being built back up :cool:

Thanks Cal
 

Attachments

  • IMG_20191202_192903low.jpg
    IMG_20191202_192903low.jpg
    57.7 KB · Views: 1,034
  • low.jpg
    low.jpg
    40.4 KB · Views: 1,032
  • IMG_20191202_204028low.jpg
    IMG_20191202_204028low.jpg
    61 KB · Views: 1,031
  • IMG_20191020_145937low.jpg
    IMG_20191020_145937low.jpg
    41.7 KB · Views: 1,031
Re: Re:

jimo746":1chx7ek4 said:
Hopefully all it needs is a good clean and some new cables, solid bikes these Bear Valleys, underrated if you ask me.

Bit more than cables :( , but i am quite particular lol
 
Re: 1997 Marin Bear Valley SE

Derailleurs in very poor condition!!

Some pics before a massive clean...




Thanks, Cal
 

Attachments

  • IMG_20191202_204004low.jpg
    IMG_20191202_204004low.jpg
    50.8 KB · Views: 1,027
  • IMG_20191202_204012low.jpg
    IMG_20191202_204012low.jpg
    41.7 KB · Views: 1,026
Re: 1997 Marin Bear Valley SE

The saddle has been passed over to my dad to be re-trimmed, its the original saddle so don't want to throw it...

Before:




Finished pics to follow...

Thanks, Cal
 

Attachments

  • IMG_20191130_163639low.jpg
    IMG_20191130_163639low.jpg
    22.3 KB · Views: 1,020
  • IMG_20191130_163647low.jpg
    IMG_20191130_163647low.jpg
    22.3 KB · Views: 1,020

Latest posts

Back
Top