1" steel fork, unicrown

[Rod_Saetan]

Looking for a fork: 1" threaded (English or Italian), unicrown design with a straight leg preferably but curved OK, minimum of 125 of steerer, canti brake mounts and ideally chrome/black/silver. Shortish for a late 80s frame.

Whatchagot?

 

[narcotitlan]

Hey Roly, I have a fillet brazed Zinn in 531, like the one on the Zinn Success. Needs a coat of paint but otherwise it's good. pm me if interested

 

[skolioza]

Re:

Hi,
Chrome silver - yes, 1" threaded - yes, lenght - probably long enough, but have to check that
Canti brake mounts - no, it's having Ubrake / rollercam mounts which also fits to late '80's bikes Suntour rollercam showed below also could be taken in needed

If it's any option for You let me know - I'll check steerer lenght
Marcin

 

[LongboardSi]

got a set off a 19" orange (the frame rotted and cracked), in a kind of satin black. I can measure them up if you like?

Si F

 

[Ferghus]

I have a Koski Duratrac in original deep grey from an 89 MB-1. Steerer is a hair under 5"
One of the nicer/nicest riding rigid forks........ever......

 

[Rod_Saetan]

Still looking, the solution I thought it had was not the solution.

 

[MatBH5]

Re:

Roberts forks..? Any use?