1 1/8 steerer tube replacement Pace RC36 EVO III ?

[No2ndPrize]

Some Pace forks as also the RC36 EVO III have a crown with bolts where the steerer tube can be replaced.

Pace sells still steel replacement sterrer, but no alloy any longer (no thread, 1 1/8")

Are there other suppliers where I can get an uncutted alloy steerer tube (no thread, 1 1/8")
or are there 3rd party replacement alloy steerer which would also fit into a Pace fork?

I know RST replacement steerer fit well into Marzocchi Bomber forks, however they look different to the original Pace steerer.

Appreciate any helpful hints.

 

[d8mok]

Not sure if it helps but I’m selling these which have a removable steerer depending on what length you need.

https://www.ebay.co.uk/itm/17534840...66s_w9sS7q&var=&widget_ver=artemis&media=COPY

 

[ishaw]

Try justbackdated, fork English. Services pace and often has spares.

If you are searching elsewhere, pace ones are straight, not flared at the crown and have a circlip groove to stop the steerer pulling through (when circlip in place). A straight steerer with a shoulder at the bottom would work too.

 

[SantasLoneCruzer]

Re-starting this thread as I need the same (straight 1 1/8” not threaded) for my RC-35 MXCD’s……

 

[No2ndPrize]

Re-starting this thread as I need the same (straight 1 1/8” not threaded) for my RC-35 MXCD’s……

If you don't mind buying a steel one :

https://www.ebay.co.uk/itm/225508120739

 

[SantasLoneCruzer]

Great minds think alike! Thats the one I found too..,.I’m assuming ally ones are rare?

 

[No2ndPrize]

Yes, the alloy ones are really rare, at least when you are looking for an uncut NOS one.

Only with pure luck I found an uncut NOS alloy after several months of searching, but havn't seen a second one since then.