Search results

Hi, Your picture was so good I have been on the lookout for one of these. I managed to find a frame and forks last month so am just getting the parts together to build one. Am I correct in thinking that it would have M739 kit on it?

Thanks, now onto my 1993 Indian Fire Trail, I see a lot of sanding and polishing in my near future

All done! I popped a pic on show us your Marin's but seeing as this is where I found out about it I thought I would pop a few pics here.

Hi, For the frame 320 wet and dry to bare metal then through the grades to 800 wet and dry. 2 coats of etch primer, wait a week then very light flat with 800 wet and dry followed by 2 coats of regular primer. Again wait for a week to fully dry. Prep for paint was working from 800-2000 with very...

I have just completed this 1990 Pine mountain. Before and after pictures. I had to strip the frame back to bare metal due to the rust.

Are these still available? Regards

Hi, I have just picked up a 1998 Marin Mount Vision frame with original Manitou forks and White industries crank. It all looks solid enough so current plan is to polish the frame and restore to catalogue spec. The big question I am hoping someone can answer is what XT groupset did it have? I am...

Next 2 projects, 90 Pine Mountain and 93 IFT. Aiming to go back to catalogue spec or as near as I can on both. The Zolatone paint on the Pine Mountain is pretty trashed with rust so a trip to the sand blaster is planned. I was loathe to do this as I really like the texture but not knowing what...

Before and after of my 96 Hawk Hill. Only cost £10 so I had a bit of fun with the colour scheme.

Hi, Would these fit an M Sport and if so do you have any left? Regards

Thanks for the info. I checked the hubs a little closer and they are Deore XT so I am guessing that someone rebuilt the wheels with the new rims.

Just picked up a 93 Marin Indian Fire Trail and it had these Parts on it. I am hoping that someone reads this and has some information/advice about them. The rims seem to have a concave shape to them, this is consistent all around on both so I assume that this is supposed to be there. The hubs...

Hi, What size clamp on the front mech, also is it top or bottom feed? Regards

Thanks you for the pic and your kind offer. Time is not an issue for me so while I will try and source one nearer I may be in contact with you about this if that is ok?

Hi, Thanks for this, would you have any idea where I could get one? Regards

My wife kindly bought me a 1990 Marin Pine Mountain to keep me occupied. It had been stripped of both front and rear derailleur as well as the original breaks. It did come with a bag of bits including the original derailleurs. I did manage, through retro bike, to get replacement breaks but there...

Hi, Are these still available? I have an Eldridge Grade made for these! Regards

Hi, Picked it up today and there is quite a bit of rust poking through. The wheels are unbelievably true. Most of the parts are there with a few extra gear pods. It looks like a bigger project than anticipated. I am going to need a bigger shed!

Thanks