Search results

Just a quick post as i don't have time to do a full spec, but i managed to get it back together yesterday. Rode it for 20 feet then crack, the seat post split at the top ! I have cut the top of on the lathe and then reinserted the top so all is well.

Bump as suiting a P7 may have restricted the options. Any olde fork please !!!!!

Sorting out a few wheel sets and the most logical way forward is to get the 9 speed freehub which handles everything cassette wise that i will need. But i could do with some spacers. i can get them for £3 each on ebay or could some one do me a deal ?

@Tsundere It is area and employment dependent ( Or if they have enough work and cant be bothered to do it). The only cost is labour as garnet can be reused a fair bit before it get too contaminated. Key bits from my experience: Make sure its cleaned of any dirt, oil and stickers these are a pain...

https://www.facebook.com/marketplace/item/1224008048015665/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks&tracking=%7B%22qid%22%3A%22-7775077039376321868%22%2C%22mf_story_key%22%3A%22161929748751518114%22%2C%22commerce_rank_obj%22%3A%22%7B%5C%22target_id%5C%22%3...

Thanks for all the advice. I have had minimal experience of mega 9 and all of it makes me think it doesn't play well with others as shown in some random pictures using the MT60 crank the drive line looked fine. The chainring gap is as close between cranks as possible yet when i just reset the BB...

Here's how

t'other side for W & G

I work for a company that makes powder coating and have had a few coaters refurb frames for me. Pointers: If you have seen there work and are happy, ask for the colours they work with and leave every thing else up to them. You should look at edge lines where they have protected a surface so it...

My mistake when typing the adjustment is so far the cage can go no further. John has an SRI on three spokes , but Dave's cousin is on the door at Golden and has met Tall Paul.

top pull 32.8 high clamp ??? The thing is i have the complete LX mega 9 ( Except the crank) and this project was an attempt to mop up some spare parts

@gtturbo yes please to pictures Without trying to be a stalker ( you will understand) i work in Farnham.

@Tootyred and @novocaine Thanks for the info i have a handful of spacers ( from god knows where or why). I will see if i can set the crank side to 61 from 56.5. Hopefully this will work. If it does then i can go get a new 122mm BB

But will that stop the jumping( granny to big) its like the pull is too big and a mega 9 crank ring to ring gap is bigger ??? ( If that makes sense?)

Compatibility issue, I have; 95 Orange P7 frame Front mech (32.8mm) Deore LX Rear mech Deore LX. Shifters Deore LX all the above Mega 9. Cassette is a 9 speed. Crank Deore FC MT60 on a 113mm BB. I can’t get the front mech to not hit the chain on the smallest ring / top 2 on the cassette, the...

The head tube is 1" , 140mm top to toe. Paintwork is of no concern just needs canti's for a 26" and some thing that would suit a 90's P7 From my addled reckoning 140mm + 35mm ( Headset) = Threaded 175 ish or Threadless +200mm

Just read the whole thread @Tootyred, you asked first but if you doesn't want them then i will buy them if they are going to be released into the wild.

Sorry bonus picture of smiles per mile you get on a Tandem.

Can I please jump in the grave on the Azonic's and would having these in return help swing your mind to getting rid of them ? They are just Trans X but nice and blue.

So I have managed to get some time to play on these. When I got these ( at a very good price, Thanks @Magpiegifts ), I was fully aware of the issue's on the rear so this is what i have focused on. The freehub locking thread was gone and trying to Helicoil an M14 fine in alloy wasn't going to...