Search results

I did read from some forum stating that newer Judys (1 piece lower legs) uses a different seal, which is why the Enduro seal for Judy forks will not work on the early 95/96 Judy. There's very little information about the seals compatibility, so I took a gamble, and I "lost the bet". Maybe I...

I bought the 28mm from ebay. The inner diameter (28mm) fits the stanchion perfectly. However, no matter how hard I try to fit into the fork, it just won't fit as it is just a little too wide. I'm not sure if I didn't try hard enough, since the Enduro seal guide did mention that seals are...

It's too wide... Didn't know that the newer Judy forks have bigger outer diameter seal. Looks like it is impossible to find the right seal for the older Judys.

Since we are on this topic, I was having problem trying to replace the seal kit with the "current" Samurai version and it seems like it is too big to fit my Judy SL 95/96 with removable canti brace. Do they match?

I'm not sure about refilling the oil as I just bought a Risse cartridge. For the elastomers and stanchions, use teflon coated grease like Judy Butter or something like these. Remember to grease the bushings too. http://www.enduroforkseals.com/id80.html

Ok, now I got it. Thanks for the help guys!

I have removed the circlip, but I still can't really tell the difference, definitely can't find the sharp edge side. But I do noticed that 1 side is flat, and the other is slighly convex. Am I missing something?

Sorry for digging this thread, but the instruction by FluffyChicken, "bit of WD40, then sharp, hard hits from a hammer.." finally released the dummy leg, after a lot of full force blows! The reason for the stuck lower leg is actually caused by the dummy leg end. Just compare both the dummy leg...

Any pics? I'm interested in the 150mm 1" threaded steerer.

Looking for 1" threaded 140mm or threadless 170mm and above.

bump! still looking for 1" threaded or threadless rockshox Judy. steerer only is also accepted.

I've just measured again, looks like it's closer to 140mm. But if there's no threaded tube, I might have to switch to threadless setup. So now I will consider both threaded and threadless. Anyone out there?

Yeah, we are kind of used to paying the shipping cost more than the item itself. But fork shouldn't cost that much I hope. You can make the packaging smaller by removing the crown. Anyway, what do you have with you?

Is it cost issue or something else? Maybe I can get someone from UK to ship it to Malaysia...

I'm looking for a Rockshox Judy with 1" steerer. If it's threaded, preferably around 130mm length. If unthreaded, any length will do. I'm also interested if you have just the Judy 1" crown.