Sorted M900 canti hardware/spares

[FluffyChicken]

Just found another 28.6 M900 rust cage, but the rest is much better.

 

[kingoffootball]

Tatty enough for practice swings freely, in fact so freely there is no spring (set properly) to get in the way, The multi adjuster wider has been removed, lower bushes seems loose without it.
M900 31.8
View attachment 592076
Other than that I have 2 NOS M901 veriosn, 2 NOS 28.6 m901
And a not quite NOS as a rusty adjuster and minor scraping to the inner cage. 31.8 M901 if memory serves.

M900 skewers could give you mine maybe.

That would be great - the practice for refinishing will definitely be valuable. I don't want to ruin any NOS ones, but the one with the rusty cage might well work. I'll pop down sometime if you let me know when is convenient. I'll take that Nukeproof wheel out your way too if I have the car, but otherwise it will need to wait until next time.

 

[kingoffootball]

Thank you to everyone who has replied, I am pretty much there ... although I feel bad for refinishing the front hub, given its condition:



All I have left to find is some canti hardware (shown below). I need one of the square profile springs, a bolt and collar and the sleeve on which the canti arm is mounted:



and possibly a 31.8 mm BP front mech, if the one Fluffyhicken gave me cannot be restored to working order after I have practised refinishing it.

I'd also still be interested in an M900 bottom bracket if there's one going cheap, but it isn't really essential for this project.

 

[kingoffootball]

Anyone got a spring/collar/bolt going spare?

 

[kingoffootball]

Bump.

 

[kingoffootball]

Please.

 

[kingoffootball]

This is likely to be the only thing preventing me from being able to ride the bike once I collect the parts from powdercoating.

 

[kingoffootball]

Changed title to reflect what I now need.

 

[kingoffootball]

Bump.

 

[kingoffootball]

An incomplete set of cantis would suffice.