Intense M! rear brake adaptor

[TZEDS]

Having trouble purchasing a rear brake adaptor for a Intense M1,is there one out there.Needs to be IS to IS as per photos for the Hope caliper,id like to fit at least a 180 rotor,any ideas

 

[danbe]

Alternatively you can use one of these

I have one somewhere I'd have to dig it out

 

[mk one]

Not sure for that caliper, mine is running a No8 M4 which bolts directly on.

You could try a +20 or +40 adapter, would measure it first though. A couple of companies did make adapters that fitted but again, not sure if they will work with your caliper!?

https://www.ebay.co.uk/itm/164270021181?hash=item263f419a3d:g:pfYAAOSwcCNgz5z-

 

[mk one]

Or if you fancy some diy -

https://www.ebay.co.uk/itm/265226923960?hash=item3dc0c1afb8:g:YREAAOSww8xg6w4n

 

[TZEDS]

Alternatively you can use one of these View attachment 555853

I have one somewhere I'd have to dig it out

Yes if you could dig it out,ill try all options

 

[TZEDS]

Not sure for that caliper, mine is running a No8 M4 which bolts directly on.

You could try a +20 or +40 adapter, would measure it first though. A couple of companies did make adapters that fitted but again, not sure if they will work with your caliper!?

https://www.ebay.co.uk/itm/164270021181?hash=item263f419a3d:g:pfYAAOSwcCNgz5z-

tricky this one without being able to measure it first,as you can see from my pcture the shimano adapter was supposed to be for a 180 rotor

 

[TZEDS]

Or if you fancy some diy -

https://www.ebay.co.uk/itm/265226923960?hash=item3dc0c1afb8:g:YREAAOSww8xg6w4n

Im watching it but id like to keep both callipers the same,but for a fiver?

 

[mk one]

Just a thought, have you tried the mount the other way, moving the caliper further forward?

Here is a pic of mine with the No8 fitted.

 

[shogun]

What brake is it? Looks like XC4? When mounted direct to IS mounts they were (somewhat unusually) 150mm rotor front, 130mm rear. You'd be better off to seek a DH4, Enduro 4 or early Mono 4. They're effectively a -10 on whatever adaptor you use.

 

[TZEDS]

MK 1 i have tried that option,the body of the caliper is two wide to fit between the frame and disc. Shogun its an Xc 4 caliper,ive fitted the front to a pair of boxxers although ive added spacers it works fine